Ajay Kumar Mishra
Editor in Chief
Dongyang Li, PhD
Professor of Chemical & Materials Engineering

University of Alberta
Edmonton, Alberta, Canada 
Phone: (780) 492-6750 
E-mail: Dongyang.Li@ualberta.ca

Education

Ph.D., Metallurgical Engineering

1995

McGillUniversity,Montreal,Canada

Ph.D., Materials Physics

1990

University of Sci. and Tech. Beijing

M.Sc., Solid State Physics

1985

Zhongshan University, China

Biography

Dr. Dongyang Li is a Professor at University of Alberta. His research interests include nano-materials and surfaces, surface science/engineering, biomedical engineering, tribological phenomena and control, and computational materials science. Dr. Li obtained a B.Sc. in Solid Mechanics from University of Science and Technology China (1982), a M.Sc. in Solid Physics from Zhongshan University (1985), a PhD in Materials Physics from University of Science and Technology Beijing (1990) and a PhD in Metallurgical Engineering from McGill University (1995). Before joining U of Alberta in 1998, he worked as a postdoctoral fellow at the Pennsylvania State University (1995 – 97). He is an Adjunct Professor in Dept. of Biomedical Engineering, U. of Alberta, a visiting professor at the National University of Singapore (2004, 2012) and Massachusetts Institute of Technology (2011), and a foreign doctoral advisor at the Harbin Institute of Technology. Dr. Li has about 230 journal publications. Dr. Li is the editor-in-chief of the International Journal of Nano & Biomaterials and a member of editorial board for a number of other journals.

 

Research Interest

  • Nano-materials and surfaces
  • Surface science and engineering for tribological and biomedical applications
  • Electronic approaches for material design
  • Wear and corrosion of materials
  • Computational materials science.

Professional Activities:

Positions Held:

07/2005-present Professor Department of Chemical & Materials Engineering, University of Alberta, Edmonton, AB, Canada
07/2002–06/2005 Associate Professor, Department of Chemica l& Materials Engineering, University of Alberta, Edmonton, AB, Canada
01/1998–06/2002 Assistant Professor, Department of Chemical & Materials Engineering, University of Alberta, Edmonton, AB, Canada
08/1995 –12/1997 University, PA, USA
07/1990 –12/1992 Research Associate, Dept. of Metallurgical Engineering, McGill University, Montreal, QC, Canada
1985-1986 Lecturer, Dept. of Physics, The South China Univ. of Tech., Guangzhou, China

Others:

2005-Present Adjunct Professor, Dept. of Bio-medical Engineering, University of Alberta
01/2012 – 06/2012       Visiting Professor, Dept. of Mech. Eng., the National University of Singapore
08/2011 – 01/2012 Visiting Professor, Dept. of Mater.Sci. & Eng., Massachusetts Institute of Technology,  Cambridge, USA
2006– Present Foreign Doctoral Advisor,Harbin Institute of Technology, China
2013 Professorship of 100- people program, Shanxi, China
1998– 2001 Natural ScienceEngineeringResearchCouncilofCanada–Industrial ResearchChair
2005 Visiting Scientist, Biophysics, Advance Research Center, National Institute of Information and Communications Technology, Japan
2004 Visiting Associate Professor, Dept. of Mech. Eng., National University of Singapore

Editorial:

  1. Editor-in-Chief, International Journal of Nano and Biomaterials
  2. Member of editorial board of Tribology–Surface, Interfaces and Materials
  3. Member of editorial board of Journal of Biosensors & Bioelectronics
  4. Member of editorial board of Nano materials & Molecular Nanotechnology
  5. Member of editorial board of International Journal of Theoretical and Applied Nanotechnology
  6. Member of editorial board of International J. of Corrosion
  7. Member of editorial board of The Open Corrosion Journal
  8. Member of editorial board of ISRN Chemical Engineering
  9. Member of editorialboard of InternationalJournal of NanoStudies & Technology (IJNST)
  10. Member of editorial board of 机械工程学报 （J. Mechanical Engineering, English version）

Publications

  1. Reza Rahemi, Dongyang Li, Variation in electron work function with temperature and its effect on Young's modulus of metals, ScriptaMaterialia, accepted, 2014.
  2. Hao Lu, Xiaochen Huang, D.Y. Li, Understanding the bond-energy, hardness and adhesive force from the phase diagram via the electron work function, J. Appl. Phys., accepted, 2014.
  3. Xuhang Tong, Hao Zhang, D. Y. Li, Effect of Annealing Treatment on Mechanical Properties of Nanocrystalline α-iron: an Atomistic Study, Scientific Report – Nature, accepted, 2014.
  4. N. Tahreen, D.L. Chen,M. Nouri, D.Y. Li,  Influence of aluminum content on twinning and texture development of cast Mg-Al-Zn alloy during compression, J. of Alloys and Compounds, accepted, 2014.
  5. Guomin Hua, Hojat Ahmadi, M. Nouri,D.Y. Li, Positive Effect of Yttrium on the Reduction of Pores in Cast Al Alloy, Mater. Chem. & Phys., 2014, 10.1016/j.matchemphys.2014.09.056.
  6. X. Tong, H. Zhang, D.Y. Li, Effects of Misorientation and Inclination on Mechanical Response of <110> Tilt Grain Boundaries in α-Fe to External Stresses, ModellingSimul. Mater. Sci. Eng.,2014, doi:10.1088/0965-0393/22/6/065016
  7. N. Tahreen, D.F. Zhang, X.Q. Jiang, C. Li, D.Y. Li, D.L. Chen，Influence of yttrium content on phase formation and strain hardening behavior of Mg-Zn-Mn magnesium alloy，J. of Alloys and Compounds, 615 (2014) 424–432.
  8. N. Fu, X. Tang, D. Y. Li, L. Parent, H. Tian, In-situ investigation of local corrosion at inter-phase boundary under an electrochemical-atomic force microscope, J. Solid State Electrochem., 2014, DOI 10.1007/s10008-014-2601-1.
  9. Xiaoguang Sun, You Wang, D.Y. Li, Xuewei Li, ZhiweiZou, Formation of Nanocrystalline CADI co-induced by introducing CeO2 nanoparticles and phase transformation, Materials and Design, 2014, accepted.
  10. ChenxinOuyang, Shigen Zhu, D.Y. Li, Corrosion and corrosive wear behavior of WC-MgO composites with and without grain-growth inhibitors, J. of Alloys and Compounds, 615 (2014) 146–155.
  11. Y.F. Liu, W. Yang, Q.L. Qin, Y.C. Wu, W. Wen, T. Zhai, B. Yu, D.Y. Li, A. Luo, G.-L. Song, Microstructure and corrosion behavior of die-cast AM60B magnesium alloys in a complex salt solution: A slow positron beam study, Corrosion Science, 81 (2014) 65–74.
  12. Hui-Bo He, Wen-Qiang Han, Hua-Ying Li, D.Y. Li, Jun Yang and Tao DengEffect of Deep Cryogenic Treatment on Machinability and Wear Mechanism of TiAlNCoated Tools during Dry Turning, Intl. J. Precision Eng. & Manuf., 15 (2014)  655-660.
  13. H. Lu, G. Hua, D.Y. Li, Dependence of the mechanical behavior on the electron work function – an alternative parameter for materials design, Appl. Phys. Lett., 103, 261902 (2013); doi: 10.1063/1.4852675.
  14. Nabila Tahreen, D. Chen, M. Nouri, D.Y. Li, Effect of Aluminum Content and Strain Rate on Strain Hardening Behavior of Cast Magnesium Alloys during Compression, Materials Science & Engineering A, 594C (2014), pp. 235-245
  15. H. Lu, D.Y. Li, Correlation between the electron work function of metals and their bulk moduli, thermal expansion and heat capacity via the Lennard-Jones potential, Phys. Stat. Sol. (b), 2013, DOI 10.1002/pssb.201350017.
  16. ChenxinOuyang, Shigen Zhu, D.Y. Li, Experimental and simulation study on the solid particle erosion of WC-MgO composites, Tribology Letters, 52 (2013) 501-510.
  17. D. Zhu, H. Zhang, D.Y. Li, Effects of nano-scale grain boundaries in Cu on its Bauschinger’s effect and response to cyclic Deformation, Mater. Sci. Eng. A, 583(2013)140–150.
  18. Xiaoguang Sun, MeisamNourib, Y. Wang, D.Y. Li,  Corrosive wear resistance of Mg-Al-Zn alloys with alloyed yttrium, Wear, 303 (2013) 1624–1632
  19. D.Y. Li, Electron work function – an effective parameter for in-situ reflection of electron activities in various processes, editorial, Journal of Biosensors & Bioelectronics, 2013, doi:10.4172/2155-6210.1000e123.
  20. Licai Fu and Dongyang Li, Surface Nanocrystalline of Martensite Steel Induced by Sandblasting at High Temperature, Adv. Eng. Mater., 15 (2013) 476-479.
  21. MeisamNouri, Xiaoguang Sun, D.Y. Li Beneficial effects of yttrium on the performance of Mg–3%Al alloy during wear, corrosion and corrosive wear, Tribology International, 67(2013)154–163.
  22. Xiaoguang Sun, You Wang, D.Y.Li, G.D. Wang, Modification of carbidicaustempered ductile iron with nano ceria for  improved mechanical properties and abrasive wear resistance, Wear, 301 (2013) 116–121.
  23. D. Zhu, H. Zhang, D.Y. Li, Influence of twin-boundary on the Bauschinger’s effect in Cu - A molecular dynamics simulation study, Metall. Mater. Trans. A, 44 (2013) 4207-4217
  24. Davis, E.M., Li, DY, Shahrooei, M, Yu, B., Muruve, D. and Irvin, R.T. 2012. Evidence of extensive diversity in bacterial     adherence mechanisms that exploit unanticipated stainless steel surface structural complexity for biofilm formation. Acta       Biomaterials,9 (2012) 6236–6244.
  25. Xianguo Yan and D.Y. Li, Effects of the cryogenic treatment condition on microstructure, mechanical behavior and wear        resistance of W9Mo3Cr4V high speed steel, Wear, 302 (2013) 854–862.
  26. X.P. Wang, D.Y. Li, L. Parent, H. Tian, Performances of hybrid high-entropy high-Cr cast irons during sliding wear and air-jet        solid-particle erosion, Wear, 301 (2013) 390–397.
  27. Lei Li, D.Y. Li, Understanding the influence of microstructure features on the erosion resistance of low-carbon pipeline steel        hrough computational simulation,Wear, 301 (2013) 70–75.
  28. B. Yu, D.Y. Li, and AmélieGrondin, Effects of the dissolved oxygen and slurry velocity on erosion-corrosion of carbon steel inaqueous slurries with carbon dioxide and silica sand,  Wear, 302 (2013) 1609–1614.
  29. Licai Fu, Lei Li, D.Y. Li, A further look at the correlation between ASTM G65 rubber-wheel abrasion and pin-on-disc weartests for data conversion,Tribology–Surface,InterfacesandMaterials, 7 (2013) 109-113.
  30. Leo Parent, D.Y. Li, Wear of Hydrotransport Lines in Athabasca Oil Sands, Wear, 301 (2013) 477 - 482.
  31. R. J. Chung, X. Tang, D.Y. Li, B. Hinckley, K. Dolman, Microstructure refinement of hypereutectic high Cr cast irons using        hard carbide-forming elements for improved wear resistance,Wear, 301 (2013) 695-706.
  32. D.Y. Li, Nanostructuring Materials towards Conventionally Unachievable Combination f Desired Properties, J NanomaterMolNanotechnol, editorial, 2012, 1:1; http://dx.doi.org/10.4172/jnmn.1000e102.
  33. Xiaoguang Sun, You Wang, D.Y. Li, Mechanical Properties and Erosion Resistance of ceria nanoparticles doped ultrafine WC-        12Co composite prepared by spark plasma sintering, Wear, 301 (2013) 406–414
  34. Ning Fu, Xinhu Tang, Dongyang Li, Application of in-situ measurement of photo-induced variations in electron work function for in-depth understanding of the photocatalytic activity of TiO2 nanotubes, Nanotechnology, 23 (2012) 275704, doi:10.1088/0957-4484/23/27/275704.
  35. GuominHuaandDongyangLi,The correlation between the electron work function and yield strength of metals, Phys.Stat.Sol.(b), 2012, DOI 10.1002/pssb.201248051.
  36. Ning Fu, Xinhu Tang, Dongyang Li, Is it effective to harvest visible light by decreasing the band gap of photocatalytic materials? Appl.Phys.Lett., 100 (2012) 093901; doi: 10.1063/1.3690052.
  37. Zhu Di; Zhang H.; Li D. Y., Molecular dynamics simulation of Bauschinger's effect in deformed copper single crystal in different strain ranges, J Appl. Phys., 110  (2011) 124911;  DOI: 10.1063/1.3672414  
  38. Zhang Jie; Tang Xinhu; Li Dongyang , One-Step Formation of Crystalline TiO(2) Nanotubular Arrays with Intrinsic p-n Junctions, J. Phys. Chem. C, 115 (2011) 21529-21534
  39. GuominHuaandDongyangLi,GenericRelationbetweentheElectronWorkFunctionandYoung’sModulusofMetals, Appl.Phys.Lett.,2011,DOI:10.1063/1.3614475.
  40. BinYu,ElisabethDavis,AdamE.Lesiuk,RandallT.Irvin,D.Y.Li,NanocrystallizationofAg-incorporatedstainlesssteelsurface forenhancedresistancestocorrosionandbacterialcolonization,Phil.Mag.Lett., 91 (2011) 697-704.
  41. ElisabethM.,Davis,D.Y.Li,R.lT.Irvin,A peptide -stainless steel reaction that yields a new bioorganic -metal state of           matter,Biomaterials,32 (2011) 5311-5319.
  42. N.Fu,Z.Jin,Y.Wu,G.XLu,D.Y.Li,Z-schemePhotocatalyticSystemUtilizingSeparateReactionCentersbyDirectional MovementofElectrons,J.Phys.Chem.C,115 (2011) 8586.
  43. C.Y.Tang,D.Y.Li,G.W.Wen,Afollow-upstudyonBauschinger’seffectinbidirectionalwearofCu-40%Znagainstdifferenttypesofcounter-face, TribologyLett.,43(2011)101-106.
  44. X.Tang,D.Y.Li,EvaluationofAsphaltanedegradationonhighlyorderedTiO2nanotubulararraysviavariationsin wettability,Langmuir,27(2011)1218–1223.
  45. C.Y.Tang,D.Y.Li,G.W.Wen,Baushinger’sEffectinWearofMaterials,TribologyLett.,41(2011)569-572.
  46. LeiLi,D.Y.Li,Simulationofcorrosion-erosionofpassivemetalsusingamicro-scaledynamicalmodel,Wear, 271 (2011) 1404-1410.
  47. Y.P.Wang,D.Y.Li,L.Parent,H.Tian,Improvingthewearresistanceofwhitecastironusinganewconcept–thehigh-entropymicrostructureapproach, Wear, 271 (2011)1623-1628.
  48. XHTang,RChung,CJPang,DYLi,BHinckley,KDolman,MicrostructureofHigh(45wt%)ChromiumCastIronsand TheirResistancetoWearandCorrosion,Wear, 271 (2011) 1426-1431.
  49. Y.Pan,D.Y.Li,H.Zhang,EnhancingthewearresistanceofsinteredWC-Cocompositebyaddingpseudo-elasticTiNiconstituent,Wear, 271 (2011) 1916-1921.
  50. ReinaldoChung,D.Y.Li,BHinckley,KDolman,Abnormalerosion–slurryvelocityrelationshipofhighchromiumcastironwithhigh carbonconcentrations,Wear, 271 (2011) 1454-1461.
  51. D.Y.Li,Q.Chen,BruceCook,Afurthersimulationstudyonthedualroleofporosityinsolid-particleerosionofmaterials, Wear, 271 (2011) 1325-1330.
  52. X.Y.Mao,D.Y.Li,F.Fang,R.S.Tan,J.Q.Jiang,SimplesurfacenanocrystallizationofCualloysforenhanced resistancestocorrosivewear,Wear, 271 (2011) 1224-1230.
  53. L.Yue,H.Zhang,D.Y.Li,Amoleculardynamicsstudyofnanotwinedcopperundertwo-directionalsliding, ScriptaMater.,63(2010)1116-1119.
  54. BinYu,AdamLesiuk,ElisabethDavis,RandallT.Irvin,D.Y.Li,Surfacenanocrystallizationfor bacterialcontrol, Langmuir,26(2010)10930–10934.
  55. L.Yue,H.Zhang,D.Y.Li,Acloserlookatthe localresponsesoftwinandgrainboundariesinCutostressatthe nanoscalewithpossibletransitionfrom theP–Htothe inverseP–Hrelation,ActaMater.58(2010)2677–2684
  56. X.Y.Mao, D.Y.Li,F.Fang,R.S.Tan and J.Q.Jiang,Does severe plastic deformation(SPD)alone generateananocrystallinestructure?,Phil.Mag. Lett.,90( 2010)349–360.
  57. Y.Pan,D.Y.Li,H.Zhang,EnhancingthewearresistanceofsinteredWC-Cocompositebyaddingpseudo-elasticTiNiconstituent,Wear, 271 (2011) 1916-1921.
  58. C.Tang,J.M.Wang,G.W.Wen,Y.Wang,D.Y.Li,BauschingerEffectin WearofMaterials,Wear, 271 (2011) 1237-1243.
  59. X.Y.Mao, D.Y.Li,F.Fang,R.S.Tan,J.Q. Jiang,Asimpletechniqueofnanocrystallizingmetallicsurfacesforenhanced resistancesto mechanical and electrochemicalattacks,Mater. Sci.&Eng.A,527(2010)2875-2880
  60. C.Chen,C.J.Shang,J.Y.Weng, D.Y.Li,Corrosion BehaviorofANewFerritic Stainless SteelusedinAutomobile Exhaust System,Adv.Mater. Res.,89(2010) 102–106.
  61. Q.Chen,D.Y.Li,K.Oiwa,PhenomenologicalSimulationofself-organizationofmicrotubuledrivenbydyneinC,J.Chem. Physics,130,214107(2009); DOI:10.1063/1.3139300.
  62. X.Tang and D.Y.Li,Fabrication,Geometry, andMechanical Properties ofHighlyOrderedTiO2 Nanotubulararrays,The J.of Phys.Chem.C, (2009)10.1021/jp900311d.
  63. Q.Chen,D.Y.Li,Y.Shitaka,andK.Oiwa,Behaviorsofmicrotubulesdrivenbyaxonemaldyneincattheircollisionsagainst micro-fabricatedtracks,J.Nanosci.Nanotechnol.9,5123-5133(2009).
  64. C.Chen,D.Y.Li,C.J.Shang,Nanocrystallizationofaluminized surface ofcarbon steel forenhancedresistancesto corrosionand corrosive wear,ElectrochimicaActa,55(2009)118–124.
  65. C.Chen,C.J.Shang,D.Y.Li,ACombinationofAldiffusionandSurfaceNanocrystallizationofCarbonSteelforEnhancedCorrosion Resistance,Phil.Mag. Lett.,89 (2009)231–240.
  66. H.Zhang,D.Y.Li,Optimizationofmicro-indentationconditionsforevaluationofinterfacialbondstrength:afiniteelement approach,ThinSolidFilms,517(2009)5259.
  67. Q. Chen,D.Y.Li,Bruce Cook,IsPorosity Always DetrimentalToTheWear ResistanceOf Materials?-AComputational Study,Wear, 267(2009)1153–1159.
  68. C.Chen,C.J.Shang,D.Y.Li,SurfacenanocrystallizationofAl-platedsteelforapplicationintheexhaustsystemofvehicles, Wear, 267(2009)345–349.
  69. LinmaoQian,ShuangZhang,D.Y.Li,ZhongrongZhou,Sphericalindentationfordeterminingthephase transitionpropertiesofshapememoryalloys,Journal ofMaterials Research,24 (2009)1082-1086.
  70. X.Tang,R.Chung,D.Y.Li,B.Hinckley,K.Dolman,Variationsinmicrostructureofhighchromiumcastironsandresultant changesinresistancetowear,corrosion and corrosive wear,Wear, 267 (2009)116-121.
  71. R.J.Chung,X.Tang,D.Y.Li,Hinckley,K.Dolman,Effects of titanium addition on microstructureand wearresistanceof hypereutectic high chromiumcastironFe-25wt.%Cr-4wt.%C,Wear, 267(2009)356-361.
  72. Q. Chen,D.Y.Li,K.Oiwa, Roles ofMicrotubuleBias and JoiningintheSelf-Organization ofMicrotubuleDriven by DyneinC –AModelingStudy，978-1-4244-2902-8/09，2009IEEE.
  73. H.Ahmadi,D.Y.Li,M. Nouri,“Effects ofyttria addition onmicrostructure,mechanicalproperties,wearresistanceand corrosivewearresistanceofTiNialloy”,J.ofMater. Sci.&Tech.,25(2009)645-648.
  74. H.ZhangandD.Y. Li,TheMechanismsofInterfacialFailureforLateralForce-sensingMicroindentationTest:Finite Element,     ActaMaterialia,56(2008)6197-6204.
  75. X.Tang and D.Y.Li,Sulfur-doped Highly OrderedLong TiO2-nanotubularArrays ith Visible LightResponse,The J.of Phys.Chem.C,112(2008)5405-5409.
  76. BinYu,RobertS.Hodges,ElisabethDavis,RandallT.Irvin,D.Y.Li,Surfacenanocrystallizationofstainlesssteelfor reducedbio-film’adherence,Nanotechnology,19(2008) 335101.
  77. S.TaoandD.Y.Li,NanocrystallizationEffectontheSurfaceElectronWorkFunctionofCopperandItsCorrosionBehaviour,Phil.Mag. Lett.,88(2008)137-144.
  78. X.Tang and D.Y.Li,ProductionofAlloyed NanocrystallineSurfaces using A Process Combining Punching,Sandblasting and Recovery Treatments,ScriptaMater., 58(2008)1090–1093.
  79. I.Radu,D.Y.Li,A furtherstudy ofthebeneficialeffects ofyttriumon oxide scale properties and high-temperature wearof Stellite 21,Tribology Lett.,30 (2008)27–34.
  80. S.Yin,D.Y.Li,A newphenomenon observed inmeasuringcorrosion component inthewear-corrosion synergy using a corrosivesliding wear test,Tribology Letters,29(2008)45-52.
  81. YanpingLiandD.Y.Li,Predictionofelastic-contactfrictionoftransitionmetalsunderlightloadsbasedontheirelectronworkfunctions,J.ofPhysics D:Applied Physics,40 (2007)5980–5983.
  82. BinYu,CarmenL.Giltner,ErinJ.vanSchaik,DaisyL.Bautista,RobertS.Hodges,GeraldF.Audette,D.Y.Li,R.T.Irvin,A NovelBiometallicInterface:HighAffinityTip-AssociatedBindingbyPilin-DerivedProteinNanotubes,JBionanoscience,1 (2007)73-83.
  83. IulianRadu,D.Y.Li,DougMacLaren,Astatisticalmethodforevaluatingandrankinglubricantsthroughmicro-mechanical heterogeneitymappingofsurfacesthatexperiencedlubricatedsliding,Tribology–Materials,Surfaces&Interfaces,1(2007)80-86.
  84. Q.Chen,D.Y.Li,K.Oiwa,Acomputationalstudyonthemovementofmicrotubuledrivenbydyneinmotors,Biophysical chemistry,129 (2007)60-69.
  85. S.Yin,D.Y.Li,R.Bouchard,EffectsofstrainrateofpriordeformationonthecorrosionandcorrosivewearofAISI1045steelina3.5%NaClsolution,Metall. Mater. Trans.A,38A(2007)1032-1040.
  86. Q.ChenandD.Y.Li,Acomputationalstudyoftheimprovementinwearresistanceofpseudo-elasticTiNi-matrixCompositeBy addingnanoTiNparticles,SmartStruc.&Mater.,16(2007)S63-S70.
  87. K.Oiwa,D.Y.Li,Y.Shitaka,R.NakamoriandH.Sakakibara,MolecularandNanometer-ScaleSelf-OrganizedSystem Generatedby Protein Motor Functions,Mater. Sci.Forum.,539 (2007)3290.
  88. W.B.BouaeshiandD.Y.Li,EffectsofY2O3AdditiononMicrostructure,MechanicalProperties,ElectrochemicalBehavior,andCorrosiveWear Resistance ofAluminum,TribologyInternational, 40 (2007)188-199.
  89. Y.  Li  and  D.Y.  Li,  An  energy  consumption  model  based  on  the  electron  work  function  and  Fermi  energyforpredicting adhesion and low-loadfrictionbetween 3d transitionmetals,Wear, 263 (2007)1610-1615.
  90. S.Tao and D.Y.Li,Investigationofcorrosion-wearsynergistic attack onnanocrystallineCu coatings,Wear, 263 (2007)363.
  91. S.Yin,D.Y.Li,andR.Bouchard,Effectsofthestrainrateofpriordeformationonthewear-corrosionsynergyofcarbonsteel, Wear, 263(2007)801-807.
  92. J.Hu,D.Y.Li,R.Lllywellen,Synergisticeffectsofmicrostructureandabrasionconditiononabrasivewearofcomposites-a modelingstudy,Wear, 263 (2007)218-227.
  93. IulianRaduandD. Y.Li,Thewearperformanceofyttrium-modifiedstellite712atelevatedtemperatures,Tribology International, 40(2007)254-265.
  94. I.RaduandD.Y.Li,EnlargingtheTemperatureRangeforMaximumWearResistanceofTiNiAlloyUsingaNTEPhase,Mater.Sci.Forum.,539 (2007)3261.
  95. I.RaduandD.Y.Li,The self-stress-adjusting capability ofTiNiAlloy with a NTE Phase,Wear, 263(2007)858.
  96. D.Y.Li,Q.Chen,X.Y.Wang,Willcrystallographicfacesofacrystalkeeptheirorderinstrengthandfriction   coefficientwhenthecontactforceisreducedtonano/micro-Newton scales?J.ofAppl.Phys.,99(2006)044305.
  97. S.TaoandD.Y.Li,Tribological,mechanicalandelectrochemicalpropertiesofnanocrystallinecopperdepositsproducedbypulseelectrodeposition,
    Nanotechnology,17(2006)65-78.
  98. W. Li andD.Y. Li, In situ measurements of  simultaneous electronic behavior  of  Cu  and Al induced  by mechanical deformation,J.ofAppl.Phys.,99(2006)073502.
  99. M.RezaBateni,J.A.Szpunar,X.Wang,andD.Y.Li,Wearandcorrosivewearofmediumcarbonsteelandstainlesssteel, Wear, 260(2006)116-122.
  100. W. Liand D.Y.Li,Influenceofsurfacemorphologyon corrosion and electron behavior,ActaMaterialia., 54(2006)445-452.
  101. D.Y.Li,Electronworkfunctionatgrainboundaryandthecorrosionbehaviorofnanocrystallinemetallicmaterials,Mat.Res.Soc.Symp.,887 (2006)0887-Q05-03.1.
  102. X.P.Jiang,X.Y.Huang,J.X.Li,D.Y.Li,C.-S.Man,M.J.Shepard,T.Zhai,EnhancementofFatigueandCorrosionPropertiesofPureTiby Sandblasting,Mater. Sci.Eng.A,429 (2006) pp.30-35.
  103. W.LIandD.Y.Li,Effectofsurfacegeometricalconfigurationsinducedbymicrocracksontheelectronwork function,ActaMaterialia, 53(2005)3871-3878.
  104. X.S.Guan,Z.F.DongandD.Y.Li,Surfacenanocrystallizationbysandblastingandannealingforimprovedmechanicaland tribologicalproperties,Nanotechnology,16 (2005)2963-2971.
  105. H.ZhangandD.Y.Li,Applicationofanovellateralforce-sensingindentationmethodforevaluationofthebondstrengthofthermalsprayed coatings,Surface&Coatingstechnology,197 (2005)137.
  106. W.LiandD.Y.Li,CharacterizationofinterfacialbondingusingascanningKelvinprobe,J.ofAppl.Phys.,97,014909(2005).
  107. S.Yin and D.Y.Li,Effectsofpriorcoldwork on corrosioncorrosive wearofpurecopperinHNO3and NaClsolutions,Mater. Sci.&Eng.A,394 (2005)266-276.
  108. W.LiandD.Y.Li,Thecorrelationbetweensurfaceroughnessandworkfunctionincopper,J.ofChemicalPhysics,122(6)(2005)064708.
  109. M.RezaBateni, J.A.Szpunar,X.Wang,andD.Y.Li,Theeffectofwearandcorrosivewearoninternalcrystallinetextureofcarbonsteeland stainlesssteel,Wear, 259 (2005)400 –404.
  110. S.B.YinandD.Y.Li,Corrosionandcorrosivewearofannealed,impact-fracturedandslowbending-fracturedsurfacelayersofAISI1045steelina 3.5%NaClSolution,Wear, 259(2005)383-390.
  111. S.B.Akonko,D.Y.Li,M.Ziomek-Moroz,J.Hawk,A.Miller,K.Cadien,EffectsofK3[Fe(CN)6]slurry’spHvalueandappliedpotentialontungsten removalrate for chemical-mechanicalplanarization application,Wear, 259 (2005)1299.
  112. W.LiandD.Y.Li,Variationsofworkfunctionandcorrosionbehaviourofdeformedcoppersurfaces,Appl.Surf.Sci.,240(2005)388-395.
  113. J.Hu,D.Y.Li,andR.Llewellyn,Computationalinvestigationofmicrostructural effects onabrasivewearofcomposite materials,Wear, 259(2005)6-17.
  114. YanpingLiandD.Y.Li,Electronworkfunction,adhesion,andfrictionbetween3dtransitionmetalsunderlightloads,Wear, 259 (2005)1432-1436.
  115. SaheedAkonko,D.Y.Li,andM.Ziomek-Moroz,Effectsofcathodicprotectiononcorrosivewearof304stainlesssteel, TribologyLett.,18(2005)405–410.
  116. M.R.Bateni,J.A.Szpunar,X.Y.Wang,andD.Y.Li,Texturechangeincarbonsteelandstainlesssteelasaresultofwear,Mater. Sci.Forum,495(2005)441-446.
  117. M.R. Bateni,M.Azzi,J.A.Szpunar,X.Y.Wang,and D.Y.Li,Theeffectofgrainorientation on microfrictionofmediumcarbonsteel,Mater. Sci.Forum,495(2005)203-206.
  118. Q.ChenandD.Y.Li,Acomputationalstudyoffrictionalheatingandenergyconversionduringslidingprocesses,Wear,259(2005)1382-1391.
  119. X.Y.WangandD.Y.Li,Applicationofanelectrochemicalscratchtechniquetoevaluatecontributionsofmechanical andelectrochemicalattacks tocorrosive wearofmaterials,Wear, 259(2005)1490-1496.
  120. IulianRadu and D.Y.Li,Investigationoftheroleof oxide scale on stellite21modifiedwithyttriumin resistingwearatelevated temperatures,Wear, 259(2005)453-458.
  121. YanpingLiandD.Y.Li,Experimentalstudiesonelectronworkfunction-adhesion-frictionrelationshipsfor3-dtransition metals,J.ofAppl.Phys.,12(2004) 7961-7965.
  122. H.Zhang,Q.ChenandD.Y.Li,Developmentofanovellateralforce-sensingindentationtechniquefordeterminationof  interfacialbonding strength,ActaMater., 52 (2004),2037-2046.
  123. WenLiandD.Y.Li,DeterminationoftheyieldlocususingaKelvinprobingmethod,J.ofPhys.D:AppliedPhysics,Vol.37,No.6 (2004) 948 -951.
  124. Q.ChenandD.Y.Li,Computersimulationoferosion-corrosionofanon-passivealloyusingamicro-scale dynamicmodel,  Mater. Sci.&Eng.A,369 (2004)284-293.
  125. W.LiandD.Y.Li,Effectsofelasticandplasticdeformationsontheelectronworkfunctionofmetalsduringbendingtests,Phil.Mag. A.,84(2004)3717-3727.
  126. X.Y.Wang,H.Zhang,andD.Y.Li,Characterizationoflubricatedwornsurfacesusinganano/microindenter, Mater.Sci.&Eng.A,371(2004)222-228.
  127. W. Liand D.Y.Li,Effectofgrain size on theelectronworkfunctionofCu and Al,Surf.Rev.andLett.,11(2004)173-178.
  128. D.Y.Li,L.Wang,W.Li,Effectsofgrainsizefrommicro-tonano-scalesontheyieldstrain undertensileandcompressivestresses using a Kelvin probingtechnique,Mater. Sci.&Eng.A.,384 (2004)355-360.
  129. IulianRadu,D.Y.Li,and R.Llewellyn,Tribologicalbehaviorofstellite21 modifiedwith yttrium,Wear, 257(2004) 1154.
  130. W.Li,Y.WangandD.Y.Li,Responseoftheelectronworkfunctiontodeformationandyieldingofcopperunderdifferentstress states,Phys.Stat.Sol.A,201 (2004)2005-2012.
  131. H.Zhang,D.Y.Li,Effects ofSputtering Condition onTribologicalProperties ofTungsten Coatings,Wear, 255(2003) 924.
  132. LinchunWangandD.Y.Li,Mechanical,electrochemicalandtribologicalpropertiesofnanocrystallinesurfaceofbrass producedby sandblasting and annealing,Surface &Coatings technology, 167(2003)188-196.
  133. M. Ziomek-Moroz,A.Miller, J.Hawk,K.Cadien,D.Y.Li,An overviewofcorrosion-wearinteraction forplanarizing metallicthinfilms,Wear, 255(2003)869-874.
  134. Q. Chen and D.Y.Li,Computersimulation ofsolid-particle erosion ofcompositematerials,Wear, 255 (2003)78.
  135. D.Y.Li,DeterminationoftheInterfacialBondStrengthforCompositeMaterials(invitedoverviewarticle),Mater.Sci.Forum, 426 (2003)2053.
  136. D.Y.Li,Developmentofnoveltribocomposites withTiNishape memoryalloymatrix,Wear, 255(2003)617.
  137. LinchunWangand D.Y.Li,Effects ofyttriumonmicrostructure,mechanicalpropertiesand high-temperature wearbehaviorof castStellite6 alloy,Wear, 255 (2003)535-544.
  138. WenLiandD.Y.Li,Asimplemethodfordeterminationoftheelectronworkfunctionofdifferentcrystallographicfacesofcopper,Phys.Stat.Sol.(a),196(2003)390-395.
  139. X.Wangand D.Y.Li,Mechanical,electrochemicalandtribologicalpropertiesofnanocrystallinesurface of304 stainlesssteel, Wear, 255(2003)836-845.
  140. HojatAhmadiand D.Y.Li,Beneficialeffects ofyttriumonthemechanical behaviorand high-temperaturewearperformanceofsurface aluminized 1045 steel,Wear, 255(2003)933-942
  141. H.Z.Ye,D.Y.LiandR.Eadie,ThephasetransformationandwearbehaviorofTiNimatrixcomposite,J.Mater.Sci.Tech.,Vol.11(2003) 19-34.
  142. WenLiand D.Y.Li,Astudy on thekineticresponseof theelectron workfunctiontowear,Wear, 225(2003)333.
  143. T.ZhangandD.Y.Li,TheeffectofYCl3 andLaCl3 additivesonwearof1045and304steelsinadilutechloridesolution, Mater. Sci.&Eng.A,345(2003)179-189.
  144. Q. Chen and D.Y.Li,Computersimulation ofsolid particle erosion,Wear, 254 (2003)203-210.
  145. W.LiandD.Y.Li,Kelvinprobing-anewtechniqueforstudyingthehistorypriortowearanddiagnosingtheonsetofwear,   Wear, 253 (2002) 746-751.
  146. W. Li,D.Y.Li,Effects ofDislocation on theElectron WorkFunction ofa Metal Surface,Mater. Sci.&Tech.,18(2002)1057.
  147. HojatAhmadiandD.Y.Li,MechanicalandTribologicalPropertiesofAluminideCoatingModifiedwithYttrium,Surface&Coatingstechnology, 161(2002)210-217.
  148. D.Y.Li,Kelvinprobingtechnique:apromisingmethodfordeterminationoftheyieldstrainofasolidunder differenttypesofstress,Phys.Stat.Sol.(a), 191(2002)427.
  149. X.Y. Wang andD.Y. Li, Mechanical and electrochemical behavior of nanocrystallinesurface of 304 stainless steel,Electrochem.Acta,47 (2002)3939-3947.
  150. W. Liand D.Y.Li,Exploratingtheapplication oftheKelvin methodinstudying thehistory priortowearand theonsetofwear, wear, 253(2002)746-751.
  151. H.ZhangandD.Y.Li,Determinationoftheinterfacialbondingstrengthonmicroscopiclevelbybendingtestwithinsitumonitoringacoustic emission,Surface &Coatings technology, 155 (2002)190.
  152. X.WangandD.Y.Li,Effectsofyttriumonmechanicalpropertiesandchemicalstabilityofpassivefilmof  aluminidecoatingon1045steel,Surface&Coatingstechnology, 160(2002)20.
  153. T.ZhangandD.Y.Li,Modificationof27CrCastIronwithAlloyingYttriumforEnhancedResistancetoSlidingWearin Corrosive Media, Metall. Mater. Trans.A,33 (2002)1981.
  154. Y.C.Luo,R.LiuandD.Y.Li,Investigationofthemechanismfortheimprovementinwearresistanceofnano-TiN/TiC/TiNicomposite:Astudy combining experimentand FEManalysis,Mater. Sci.&Eng.A,329-331(2002)768.
  155. D.Y.LiandY.Luo,EffectsofTiNnano-particlesonporosityandwearbehaviorofTiC/TiNitribocomposite,J.ofMater.Sci. Lett.,20 (2002)2249.
  156. T.Zhang andD.Y.Li,EffectofAlloyingYttriumonCorrosion-ErosionBehaviorof27CrCastwhiteIronin Differentcorrosive Slurries,Mater. Sci.&Eng.A,325 (2002)87.
  157. H.Z.Ye,D.Y.Li,andR.L.Eadie,ImprovementinwearresistanceofTiNi-basedcompositebyhotisostaticpressing"MaterialsScience &EngineeringA,329-331 (2002)750
  158. T.ZhangandD.Y.Li,VariationinerosionresistanceofpseudoelasticTiNialloywithrespecttotemperature,Mater.Sci.&Eng.A,329-331 (2002)563.
  159. D.Y.Li,X.Ma,PavelMikula,andM.Vrana,EffectsofagingonmartensitictransformationandtribologicalpropertiesofTiNialloyusing DSC,neutron diffraction,andmicro-mechanical probe,Mater. Sci.&Tech.,18(2002)995.
  160. D.Y.LiandWenLi,Electronworkfunction:aparametersensitivetotheadhesivebehaviorofcrystallographicsurfaces,Appl.Phys.Lett.,79 (2001)4337.
  161. Y.Luo and D.Y.Li,New Wear- ResistantMaterial: Nano-TiN/TiC/TiNiComposite,J.ofMater. Sci.,36(2001)4695.
  162. X.WangandD.Y.Li,Investigationofthesynergismofwearandcorrosionusinganelectrochemicalscratchtechnique, TribologyLett.,11(2001)117.
  163. K.ElalemandD.Y.Li,Variationsinwearlosswithrespecttoappliedloadandslidingspeedunderdrysand/rubber-wheelabrasion condition:amodelingstudy,Wear, 250(2001)59-65.
  164. R.LiuandD.Y.Li,ModificationofArchard’sEquationbyTakingAccountofElastic/PseudoelasticPropertiesof Materials, Wear, 251(2001)956-964.
  165. T.ZhangandD.Y.Li,Improvementinthecorrosion-erosionresistanceof304stainlesssteelwithalloyedyttrium,J.of Mater. Sci.,36(2001)3479.
  166. D.Y.Li,PseudoelasticTriboMaterials,ASTMSTP1339(2001),382.
  167. H.Z.Ye,D.Y.Li,and R.Eadie, InfluenceofPorosity onMechanical and wearPropertiesofSinteredTiNi- matrixcomposites, J.ofMater. Eng.&Performance,10 (2001)178.
  168. X.WangandD.Y.Li,Beneficialeffectsofyttriumonmechanicalfailureandchemicalstabilityofpassivefilmonstainlesssteel,Mater. Sci.&Eng.A,315(2001)158.
  169. H.Ye,R.Liu,D.Y.LiandR.Eadie,Wearandfrictionofanewtypewear-resistantmaterial:TiNi-basedcomposites, CompositeScience&Technology,61(7)(2001)987.
  170. T.Zhang, D.Y.Li,Improvementintheresistanceof Al withyttriatoslidingwearinair andin a corrosive medium, Wear, 251(2001)1250-1256.
  171. K. Elalem, D.Y. Li, M.J. Anderson, and S. Chiovelli, ModelingAbrasive Wear of Homogeneous andHeterogeneous Materials, ASTMSTP1339(2001)90.
  172. R.Liu and D.Y.Li,Astudy ofthemechanism for beneficialeffects ofyttriumadditiveinlubricant on corrosivewearandfrictionofmetals, ASTMSTP1339(2001)549.
  173. T.Zhang andD.Y.Li,CorrosiveWear Behaviorof304 Stainless SteelandItsVariation with Alloyed Oxygen-ActiveElement Yttrium,ASTMSTP1339(2001)535.
  174. D.Y.Li,Exploration ofTiNiShapeMemoryAlloyfor PotentialApplicationinANewArea:TribologicalEngineering,Smart MaterialsandStructure,9 No5 (2000)717-726.
  175. R.LiuandD.Y.Li,ExperimentalStudiesonTribologicalPropertiesofPseudoelasticTiNiAlloywithComparisontoStainless Steel304,Metall. Mater. Trans.A,31A (2000)2773.
  176. R.LiuandD.Y.Li,AFiniteElementModelStudyonWearResistanceofPseudoelasticTiNiAlloy,Mater. Sci.&Eng.A, 277 (2000)169.
  177. T.Zhang andD.Y.Li,Effects ofYttriumon Corrosive Erosionand Dry Sand Erosion ofFeAlCr(Y)DiffusionCoatings on 1030 Steel,Mater. Sci.&Eng.A,277(2000)18.
  178. R.Liu and D.Y.Li,Effects ofYttriumand CeriumAdditivesinLubricants on CorrosiveWear ofStainless Steel304 andAl Alloy 6061,J.ofMater. Sci.,35(2000)633.
  179. T.Zhang andD.Y.Li,Effects ofCe on Dry Sand Erosion and Corrosive Erosion ofAluminide Coating on 1030 Steel,J. Mater. Sci.Lett,19 (2000)429.
  180. R.Liu and D.Y.Li,Indentationbehaviourand wearresistanceofpseudoelasticTiNialloy,Mater. Sci.&Tech.,16 (2000) 328.
  181. T.Zhang,Y.Luo and D.Y.Li,Erosion behaviorofaluminide coating modifiedwith Yaddition underdifferenterosion conditions,Surface and Coatings Technology,126 (2000)102.
  182. D.Y.Liand X.Ma, Variationsinwear resistanceofpseudoelastictribo-alloyasa funtionofpsudoelasticityandhardness,J. Mater. Sci.&Tech.,17(2000)45.
  183. T.Zhang and D.Y.Li,Beneficialeffectofoxygen-active elements onthe resistanceofaluminide coatingstocorrosiveerosionand dry erosion,Surface and Coatings Technology,130(2000)57.
  184. D.Y.Li,DevelopmentofNovelWear-resistantMaterials:TiNi-basedPseudoelasticMaterials,Materials&Design,21(2000)551.
  185. X.Ma, R.Liu,and D.Y.Li,Abrasive wearbehaviorofD2 tool steelwith respecttoloadand sliding speed underdry sand/rubberwheelabrasion condition,Wear, 241 (2000)79.
  186. T.Zhang, D.Y.Li,An ExperimentalStudy on theErosion BehaviorofPseudoelasticTiNiAlloyinDry Sand andin Aggressive Media, Mater. Sci&Eng.A,293(2000)208.
  187. D.Y.Li,Morphological Evolution ofCoherentTi11Ni14 Precipitate underInhomogeneousStress,Phil.Mag. A,79 (1999) 2603.
  188. D.Y.Liand L.Q.Chen,Shape Evolution and Splitting ofCoherentParticles underApplied Stresses,ActaMaterialia, 47, 247(1999).
  189. R.Liu,D.Y.Li,Y.S.Xie,R.Liewellyn,and H.M.Hawthorne,IndentationBehaviourofPseudoelasticTiNiAlloy,ScriptaMater.,41 (1999)691.
  190. R.Liu and D.Y.Li,Protective EffectofYttriuminLubricants on CorrosiveWear,Wear, 225-229,968 (1999).
  191. D.Y.Liand R.Liu,TheMechanism ResponsibleforHighWear Resistance ofPseudo-elasticTiNiAlloy-ANovelTribo- Material,Wear, 225-229,777(1999).
  192. H.Z.Ye,R.Liu,D.Y.Liand R.Eadie,DevelopmentofANew Wear-resistant Material: TiC/TiNiComposite,ScriptaMater., 41(1999)1039.
  193. D.Y.Li,K.Elalem,M.J.Anderson,and S.Chiovelli,AMicro-scaleDynamicalModel forWear Simulation,Wear, 225-229, 380(1999).
  194. T.Zhang,Y.Luo,and D.Y.Li,ModificationofAluminide Coating with YttriumforImprovedResistance toCorrosive Erosion,J.ofMater. Eng.&Performance,8 (1999)635.
  195. T.Zhang and D.Y.Li,Effects ofYttriumon SlidingWear of304 Stainless Steel inDilute H2SO4 Solution andinAir,Mater. Sci.&Tech.,15(1999)1441.
  196. K.ElalemandD.Y.Li,ComputerModelingofAbrasiveWear,J.ofComputer-AidedMaterialsDesign,6 (1999)185.
  197. D.Y.Liand L.Q.Chen,Computersimulation ofmicrostructural evolution underexternalstresses,in"Computer-Aided Design ofHigh-TemperatureMaterials", OxfordUniversity Press,1999,PP.212-228.
  198. D.Y.Li,ANewType ofWear-resistant Material: Pseudo-elastic TiNiAlloy,Wear,221,116(1998).
  199. D.Y.Liand L.Q.Chen,ComputerSimulation ofStress-Oriented Nucleation and GrowthofTheta PrecipitatesinAl-CuAlloys, ActaMaterialia, 46,2573 (1998).
  200. D.Y.Liand L.Q.Chen,Morphological Evolution ofCoherentMulti-variant Ti11Ni14 PrecipitatesinTiNiAlloys underAnApplied Stress-AComputerSimulation Study,ActaMaterialia, 46,639(1998).
  201. D.Y.Liand L.Q.Chen,Selective VariantGrowthofCoherentPrecipitate underExternalConstraints,J.ofPhaseEquilibria, 19,523 (1998).
  202. D.Y.Liand L.Q.Chen,Shape ofARhombohedralCoherentTi11Ni14 PrecipitateinACubic MatrixandItsGrowthand DissolutionunderApplied Stresses,ActaMaterialia, 45,2435 (1997).
  203. D.Y.Liand J.A.Szpunar,AMonteCarlo Simulation ApproachtotheTexture Formation during Electro-deposition-I.The Simulation Model, Electrochim.Acta,42,37 (1997).
  204. D.Y.Liand J.A.Szpunar,AMonteCarlo Simulation ApproachtotheTexture Formation during Electro-deposition-II. Simulation and Experiment,Electrochim.Acta,42,47(1997).
  205. D.Y.Liand L.Q.Chen,MorpholorgicalEvolution and Stress-induced Raft-like ArrangementofGamaPrimerPrecipitatesin AHigh-temperature Ni-based Alloy,ScriptaMaterialia, 31,1271 (1997).
  206. D.Y.Liand L.Q.Chen,Selective VariantGrowthofCoherentTi11Ni14 PrecipitatesinA TiNiAlloy underAppliedStresses, ActaMaterialia, 45,471(1997).
  207. D.Y.LiandJ.A.Szpunar,Texturalevolutioninelectrodepositsundertheinfluenceofadsorbedforeignspecies,PartI-Texturalevolution inironelectrodeposits affected by hydrogenco-deposition,J.Mater. Sci.,32,5513 (1997).
  208. D.Y.Li,et.al.,Texturalevolutioninelectrodepositsundertheinfluenceofadsorbedforeignspecies,PartII -Asimulation study on effects ofpotassiumchloride on texturalevolutionincopperelectrodeposits,J.Mater. Sci.,32,5525 (1997).
  209. D.Y.Li,J.A.Szpunar,and D.Brouno,AStudy on Solid/MeltInterfacesand theFormation of<100 Texture inSolidifiedFCCMetals,J.Mater. Sci.&Tech.,13,457 (1997).
  210. D.Y.Li,WearBehaviourofTiNiShape MemoryAlloys,Script.Mater., 34,195-200(1996).
  211. D.Y.Liand J.A.Szpunar,ModellingofTexturalEvolution inElectrodeposited Metal Films,Mater.Sci. Forum,204,343-349(1996).
  212. D.Y.Liand J.A.Szpunar,APossible RoleofSurface-packingDensityinTexture GrowthduringSolidification ofFCC Metals, J.Mater. Sci.Lett.,13,1521 (1994).
  213. D.Y.Liand J.A.Szpunar,Modellingof theTexture EvolutionDuringIronElectrodeposition,Mater.Sci.Forum,157,1827(1994).
  214. D.Y.Li,C.Rocaniere,and J.A.Szpunar,Texture ofAl-SiAlloyIngots,Mater. Sci.Forum,157 (1994)555.
  215. D.Y.Liand J.A.Szpunar,Texture competition during Solidification Processes,Mater. Sci.Forum,157(1994)547.
  216. D.Y.Li,C.Rocaniere,S.Das and J.A.Szpunar,TheTexture FormationinAl-7%SiIngots,J.Mater. Sci.Lett.,13,453(1994).
  217. D.Y.Liand J.A.Szpunar,The Texture ofElectrodeposited IronFilms,J.Electr.Mater.,22,645 (1993).
  218. D.Y.Liand J.A.Szpunar,Computer Simulation ofElectrodepositionProcess,J.Electr.Mater.,22,653(1993).
  219. D.Y.Liand J.A.Szpunar,Surface <111>FibreTexture ofA Strip-CastAlAlloy,ScriptMetall.Mater., 28,1377(1993).
  220. D.Y.Liand J.A.Szpunar,ATexture Formation Mechanism During Electrodeposition,J.Mater.Sci.,28,5554(1993).
  221. D.Y.Liand J.A.Szpunar,The Slip SysteminAnOrderedTiNiAlloy,J.Mater. Sci.Lett., 11,510 (1992).
  222. D.Y.LiandJ.A.Szpunar,DeterminationofSingleCrystals'ElasticConstantsfromtheMeasurementofUltrasonic VelocitiesinPolycrystallineMaterials,ActaMetall. Mater., 40,3277 (1992).
  223. D.Y.Li,X.F.Wuand T.Ko,The EffectofStress on SoftModesfor Phase TransformationsinATi-NiAlloyI.Stress-induced Transformations and SoftModes,Phil.Mag., A,63,585(1991).
  224. D.Y.Li,X.F.Wuand T.Ko,The EffectofStress on SoftModesfor Phase TransformationsinATi-NiAlloyII. Effects of Ageing and ThermalCycling onthePhase Transformations,Phil.Mag. A,63,603 (1991).
  225. D.Y.Li,X.F.Wuand T.Ko,The TextureofTi-51.5at%NiRolledPlateandItsEffectontheAll-Round Shape MemoryEffect, ActaMater.,38,19(1990).
  226. D.Y.Li,X.F.WuandT.Ko,TheEffectofStressontheLatticeInstabilityofAnEquiatomicTiNiAlloy,Phys.Stat.Sol.,(b), 154,85(1989).
  227. D.Y.Li,G. Lin,Thermodynamic Studies on Phase Transformation inTiNiAlloy,ActaSci.Natur.(J. ZhongshanUniv.), 7, 51(1987).
  228. G. Lin and D.Y.Li,Thermodynamic Study ofPhase TransformationsinTiNi-based Alloys,RareMetals, No.6,296(1987).
  229. D.Y.LiandG.Lin,EffectsofThermalCyclingonPhaseTransformationBehaviourandDeformationBehaviourofTi-50.3at%NiAlloy,ActaSci.Natur. (J.Zhongshan Univ.),No.4,6(1985).

Handbook:

  1. D.Y.Li,Chapter24-Lubricants,TheSmithellsMetalsReferenceBook(8thedition),2004,ElsevierLtd,Kidlington, Oxford,UK,PP.24-1~24-15.
  2. D.Y.Li,Chapter25-Frictionandwear,TheSmithellsMetalsReferenceBook(8thedition),2004,ElsevierLtd, Kidlington,Oxford,UK,PP.25-1~25-26.
  3. D.Y.Li,CorrosiveWear,inEncyclopediaofTribology,Springer,2013, ISBN0387928960.

 

Autoimmune Journal Flyer