Education

B. Eng. degree from Tsinghua University in China in 1982
Ph.D. degree in at the University of British Columbia, in Canada in 1988

Biography

Dr. Jesse Zhu is a Distinguished University Professor and Canada Research Chair in the Department of Chemical and Biochemical Engineering, Faculty of Engineering, at Western University, in London, Ontario, Canada.  He is also a Fellow of Royal Society of Canada, a Fellow of Canadian Academy of Engineering, a Fellow of the Engineering Institute of Canada, and a Fellow of the Chemical Institute of Canada. 
Dr. Zhu received his B. Eng. from Tsinghua University in Beijing in 1982 and PhD from the University of British Columbia in Vancouver, Canada in 1998, both in Chemical Engineering.  After working several years as a Research Scientist for Shell Research in the Netherlands and at another university in Canada, he moved to Western University in London, Canada in 1990, where he quickly attained full professorship in 1999.  By the same year, he established the Particle Technology Research Centre, the first in Canada, at his university and has served as its Director since then.  This centre is comprised of 15 Professors carrying out numerous research projects over a wide range of particle related technologies.  Between 2000 and 2005, he held the position of Senior Ontario ORDCF Research Chair for Ultrafine Powder Technology, sponsored by the Ontario Ministry of Research and Innovation.  In 2004, he became a Senior Canada Research Chair, established by the Canadian Government. 
Prof. Zhu has many years of experience in the research area of powder handling, fluid-particle and multi-phase flow systems.  His contributions to fundamental research and technology developments can be reflected by the over 300 referred journal publications, the dozen of patents granted, the over 85 Masters and PhD students graduated under his supervision, the sizable research funding and the international scholarly activities such as chairing international conferences and serving on journal editorial boards.  Currently he is leading a very successful Canada Research Chair Program in Particle Technology Applications at Western University, with 30-40 graduate students, post doctoral fellows and research engineers/assistants, working on a very wide range of projects.  In addition to fundamental research, he is particularly active in technology development and transfer, with 20 granted patents and several more pending.  Some of the inventions have been commercialized and/or are now in the process of being commercialized.  Those include an ultrafine powder technology for automobile and materials industry, a dry powder coating technology for pharmaceutical tablets, a dry powder inhalation technology, and a fluidized bed bioreactor for efficient wastewater treatment. 
Many awards were credited to his research achievements including three major awards given by the Canadian Society of Chemical Engineering (Syncrude Innovation Award for Outstanding Young Chemical Engineer, Bantrel Award in Design and Industrial Practice, and R.S. Jane Award as the highest award of the society), the PSRI Fluidization Lectureship Award by the American Institute of Chemical Engineers, the Premier's Research Excellence Award, the Ontario Professional Engineers Engineering Medal, and the Distinguished University Professor and the Engineering Prize for Achievement in Research by Western University. 

Dr. Zhu has also chaired and co-chaired several international conferences.  In Canada, Dr. Zhu was the Technical Program Chair of the 1998 Annual Conference of the Canadian Chemical Engineering and served as the Conference Chair for the same conference in 2011.  He is also frequently sought for speakers, serve as plenary and keynote speakers on many occasions around the world. 

Research Interest

Multiphase flow systems and we invented technologies in using fluidized and circulating fluidized bed biological reactors for efficient wastewater treatment.

Professional Activities:

• Canada Research Chair
• Fellow, Canadian Academy of Engineering
• Fellow, Chemical Institute of Canada
• Director, Particle Technology Research Centre, Dept. of Chemical & Biochemical Engineering, Faculty of Engineering, University of Western Ontario, Canada

Publications

1. Wang F, Martinuzzi R and Zhu J,  Experimental Study of Particle Trajectory in Electrostatics Powder Coating Process, Powder Technol., 150(1), 20-29, 2005.
2. Cheng Y and Zhu J-X, CFD Modeling and Simulation of Hydrodynamics in Liquid-Solid Circulating Fluidized Beds, Can. J. Chem. Eng., 83(2), 177-185, 2005.
3. Wang T, Chang J, Lv P and Zhu J, A Novel Catalyst for Cracking of Biomass Tar, Energy & Fuel, 19(2), 22-27, 2005.
4. Li Z, Zhu J, and Zhang C, Numerical Simulations of Ultrafine Powder Coating Systems, Powder Technol.,: 150(3), 155-167, 2005.
5. Huang W, Yan A and Zhu J, Axial Solids Distribution and Flow Development in the Risers of Circulating Fluidized Beds with Different Heights, J. Chin. Inst. Chem. Engrs., 36(3), 285-292.
6. Yan A, Ball JS and Zhu J, Scale-up Effect of Riser Reactors (3) - Axial and Radial Solids Flux Distribution and Flow Development, Chem. Eng. J., 109(1-3), 97-106, 2005.
7. Zheng Y, Zhu J and Wushouer A, Transition from Low Velocity to High Velocity in a Three Phase Fluidized Bed, Chem. Eng. & Technol., 28(9), 1010-1015, 2005.
8. Yan A and Zhu J, Scale-Up Effect of Riser Reactors - Particle Velocity and Flow Development, AIChE J., 51(11), 2956-2964, 2005.
9. Xu C and Zhu J, Experimental and Theoretical Study on the Agglomeration Arising from Fluidization of Cohesive Particles —Effects of Mechanical Vibration¨, Chem. Eng. Sci.,  60(23), 6529-6541, 2005.
10. Patel A, Nakhla G and Zhu J, Detachment of Multi Species Biofilm in Circulating Fluidized Bed Bioreactor, Biotechnol. Bioeng.,92(4), 427-437, 2005.
11. Lin H-B, Huang W-X, Qi X-B, Shi Y-F, Zhu J-X. Axial Distributions of Averaged Solids Holdups for Coarse Particles in CFB Riser. J. Chem. Eng. Chinese Univ., 19(3), 327-331, 2005.
12. Qi X-B, Zeng T, Huang W-X, Zhu J-X and Shi Y-F. Experimental Study of Solids Holdups Inside Particle Clusters in CFB Risers. J. Sichuan Univ., 37(5), 46-50, 2005.
13. Qi X-B, Huang W-X, Zhu J-X, Shi Y-F. Correlation and Prediction of Solids Holdups of Gas-Solid Two-Phase Flow in Fully Developed Region of CFB Risers. J. Chem. Eng. Chinese Univ., 19(5), 613-618, 2005.
14. Qi X-B, Huang W-X, Zhu J-X, Shi Y-F. Similarity of Gas-Solid Two-Phase Flow Behavior in CFB Riser. J. Chem. Ind. Eng., 56(11), 2096-2101, 2005.
15. Li Z, Zhang C and Zhu J, “Numerical Study of the Effect of Particle Size on the Coating Efficiency and Uniformity of an Electrostatic Powder Coating Process”, Can. J. Chem. Eng, 83(5), 882-888, 2005.
16. Xu C and Zhu J, “Parametric Study of Fine Particle Fluidization under Mechanical Vibration”, Powder Technol., 161(2), 135-144, 2006. 
17. Xu C, Cheng Y and Zhu J, “Fluidization of Fine Particles in a Sound Field and Identification of Group C/A Particles by Using Acoustic Waves”, Powder Technol., 161(3), 227-234, 2006. 
18. Qi X-B, Zeng T, Huang W-X, Zhu J-X. “Experiments and Predictions of Pressure Drop and Solids Holdup in Fully Developed Region of CFB risers”, J. Sichuan Univ., 38(1), 49 - 53, 2006.
19. Li Y, Zhang C and Zhu J. “Numerical Simulation of Gas-Solid Two-Phase Flow in Lung Airways”. International Journal of Nonlinear Sciences and Numerical Simulation, 7(3), 357-360, 2006.
20. Wu B, Briens L and Zhu J, “Multi-scale Flow Behavior in Gas-solids Two-phase Flow Systems”, Chem. Eng. J., 117(3), 187-195, 2006. 
21. Qi X-B, Huang W-X, Zhu J-X, Shi Y-F. “Further Investigation on Similarity of Gas-solid Two-phase Flow Behavior in CFB Risers”, J. Chem. Ind. Eng., 57(3), 541-547, 2006.
22. Shah U, Zhu J, Zhang C and Nother Senior J H, “Numerical Investigation of Coarse Powder and Air Flow in an Electrostatic Powder Coating Process”, Powder Technol., 164(1), 22-32, 2006.
23. Zhang H and Zhu J, “Gas-Solids Flow Behavior with a Gas Velocity close to Zero”, China Particuologoy, 4(3-4), 167-177, 2006.
24. Manyele1 S V, Zhu J, Khayat  R E and Pärssinen J H, “Analysis of the Chaotic Dynamics of a High-Flux CFB Riser Using Solids Concentration Measurements”, China Particuologoy, 4(3-4), 136-149, 2006.
25. Xu C and Zhu J, “Effects of Gas Type and Temperature on Fine Particle Fluidization”, China Particuologoy, 4(3-4), 114-121, 2006.
26. Qi X-B, Huang W-X, Zhu J-X, Shi Y-F. “Combination Effect of Nozzle Gas Distributor and Particle Properties on Gas-Solid Flow Behaviors in CFB Risers”, J. Chem. Eng. Chinese Univ., 20(3), 325-330, 2006.
27. Li Z, Zhang C, Zhu J, “Numerical Study of Air-Particle Two-Phase Flows inside a Powder Coating Booth”, Int. J. Computational Methods Eng. Sci. Mechanics, 7(3), 141-154, 2006.
28. Trivedi U J, Bassi A S and Zhu J, “Investigation on Phenol Removal using Sol-gel Alginate Immobilized Soybean Seed Hull Peroxidase”, Can. J. Chem. Eng., 84(2), 239-247, 2006.
29. Shah U, Zhang C and Zhu J, “Comparison of Electrostatic Fine Powder Coating and Coarse Powder Coating by Numerical Simulations”, J. Electrostatics, 64(6), 345-354, 2006.
30. Trivedi U J, Bassi A S and Zhu J-X, “Continuous enzymatic polymerization of phenols in a liquid-solid circulating fluidized beds”, Powder Technol., 169(2), 61-70, 2006.
31. Huang W-X, Zhu J-X and Pärssinen J H, “Comprehensive Study on Solids Acceleration Length in a Long CFB Riser”, Chem. Eng. & Technol., 29(10), 1197-1204, 2006.
32. Chen P, Zhao Z-L, Yin X-L, Wu C-Z, Chen Y and Zhu J-X. “The Circulating Flow Characteristics of Sawdust Particulate in Circulating Fluidized Bed with a Loop Seal”, J Solar Energy, 27(10), 1037-1042, 2006.
33. Patel A, Zhu J-X and Nakhla G, “Simultaneous Carbon, Nitrogen and Phosphorous Removal from Municipal Wastewater in a Circulating Fluidized Bed Bioreactor”, Chemosphere, 65(7), 1103-1112, 2006.
34. Shah U, Zhu J, Zhang C, Wang F and Martinuzzi R, “Validation of A Numerical Model for the Simulation of An Electrostatic Powder Coating Process”, Int. J. Multiphase Flow, 33(5), 557-573, 2007.
35. Huang W-X, Yan A, and Zhu J-X, “Hydrodynamics and Flow Development in a 15.1 m Circulating Fluidized Bed Riser”, Chem. Eng. & Technol., 30(4), 460-466, 2007.
36. Luo B-L, Yan D, Ma Y-L, Barghi S and Zhu J-X, “Characteristics of Gas-Solid Mass Transfer in a Cocurrent Downflow Circulating Fluidized Bed Reactor”, Chem. Eng. J., 132(1-3), 9-15, 2007.
37. Zhu H-Y, Zhu J-X, Li G-Z and Li F-Y, “Detailed Measurements of Flow Structure Inside a Dense Gas-Solids Fluidized Bed”, Powder Technology, 2007, in press.
38. Wu B-Y, Zhu J-X and Briens L, “A Comparison of Flow Dynamics and Flow Structure in a Riser and a Downer”, Chem. Eng. & Technol., 30(4), 448-459, 2007.
39. Lv P-M, Yuan Z-H, Ma L-L, Wu C-Z, Chen Y, Zhu J-X. "Hydrogen-rich Gas Production from Biomass Air and Oxygen/steam Gasification in a Downdraft Gasifier". Renewable Energy, 32(4), 2173-2185, 2007.
40. Qi X-B, Zhang H, Huang W-X, Zhu J-X, Shi Y-F. "Friction between Gas-solid Suspension and CFB Downer Wall". J. Chem. Ind. Eng., 58(7), 1685-1690, 2007.
41. Qi X-B, Zhang H, Huang W-X, Zhu J-X. "Solids Concentrations in the Fully Developed Zone of CFB Downers". J. Chem. Eng. Chinese Univ., 21(4), 621-626, 2007.
42. Wu B-Y, Zhu J-X, Briens L and Zhang H, “Flow Dynamics in a Four-inch Downer Using Solids Concentration Measurements”, Powder Technol., 178(4), 187-193, 2007.
43. Razzak S A, Barghi S, Zhu J-X, “Electrical Resistance Tomography for flow characterization of a Gas-Liquid-Solid Three-Phase Circulating Fluidized Bed”, Chem. Eng. Sci., 62(24), 7253-7263, 2007.
44. Qi X-B, Zhang H, Zhu J-X, “Solids Concentration in the Fully Developed Region of Circulating Fluidized Bed Downers”, Powder Technol., in press, 2007.
45. Cheng Y, Wu C N, Zhu J-X, Wei F and Jin Y, “Downer Reactor: from Fundamental Study to Industrial Application”, Powder Technol., in press, 2007.
46. Qi X-B, Huang W-X, Zhu J-X, “Friction between Co-current Upward Gas-solid Flow and Column Wall”, Asia-Pacific J. of Chem. Eng., in press, 2007.
47. Ma Y and Zhu J-X, "Heat Transfer between Gas-Solids Suspensions and Immersed Surface in an Upflow Fluidized Bed (Riser)", Chem. Eng. Sci., 55(5), 981-989, 2000.
48. Wang F, Zhu J and Beeckmans J M, "Pressure Gradient and Particle Adhesion in the Pneumatic Transport of Cohesive Fine Powders", Int. J. Multiphase Flow, 26(1), 245-265, 2000.
49. Zheng Y and Zhu J-X, "Microstructure Aspects of the Flow Behaviour in a Liquid-Solids Circulating Fluidized Bed", Can. J. Chem. Eng., 78(1), 75-81, 2000.
50. Zhu J-X, Zheng Y, Karamanev DG, and Bassi AS, "(Gas-)Liquid-Solid Circulating Fluidized Beds and their Potential Applications to Bioreactor Engineering", Can. J. Chem. Eng., 78(1), 82-94, 2000.
51. Issangya AS, Grace JR, Bai D and Zhu J-X, "Further Measurements of Flow Dynamics in a High-Density Circulating Fluidized Bed Riser", Powder Technol., 111(1-2), 104-113, 2000.
52. Ball JS and Zhu J-X, "A Comparison of Solids Fluxes in a Pair of Downer and Riser Reactors", Chem. Eng. & Technol., 23(8), 701-705, 2000.
53. Zheng Y and Zhu J-X, "Overall Pressure Balance and System Stability in a Liquid-Solid Circulating Fluidized Bed", Chem. Eng. J., 79(2), 145-153, 2000.
54. Zhang H and Zhu J-X, "Hydrodynamics in Downflow Fluidized Beds (2): Particle Velocity and Solids Flux Profiles", Chem. Eng. Sci., 55(19), 4367-4377, 2000.
55. Lan Q, Zhu J-X, Bassi AS, Margaritis A, Zheng Y and Rowe GN, "Continuous Protein Recovery Using a Liquid-Solid Circulating Fluidized Bed Ion Exchange System: Modelling and Experimental Studies", Can. J. Chem. Eng., 78(5), 858-866, 2000.
56. Ball JS and Zhu J-X, "A Preliminary Study into the Local Solids Fluxes in a Downer Reactor", Powder Technol., 114(2), 96-101, 2001.
57. Zheng Y and Zhu J-X, "The Onset Velocity of a Liquid-Solid Circulating Fluidized Bed", Powder Technol., 114(3), 244-251, 2001.
58. Lan Q, Bassi AB, Zhu J-X and Margaritis A, "A Modified Langmuir Model for the Prediction of the Effects of Ionic Strength on the Equilibrium Characteristics of Protein Adsorption onto Ion Exchange/Affinity Adsorbents", Chem. Eng. J., 81(1-3), 179-186, 2001.
59. Liu W-D, Luo K-B, Zhu J-X and Beeckmans JM, "Characterization of High Density Gas-Solids Downflow Fluidized Beds", Powder Technol., 115(1), 27-35, 2001.
60. Luo K-B, Liu W-D, Zhu J-X and Beeckmans JM, "Characterization of Gas Upward-Solids Downward Counter-Current Fluidized Flow", Powder Technol., 115(1), 36-44, 2001
61. Huang W-X and Zhu J-X, “An Experimental Investigation on Solid Acceleration Length in the Riser of a Long Circulating Fluidized Bed”, Chinese J. Chem. Eng., 9(1):70-76, 2001.
62. Zhu J-X, Li G-Z, Qin S-Z, Li F-Y, Zhang H and Yang Y-L, "Direct Measurements of Particle Velocities in a Circulating Fluidized Bed Using a Novel Optical Fibre Probe", Powder Technol., 115(2), 184-192, 2001. 
63. Ma Y and Zhu J-X, "Heat Transfer in Upflow and Downflow Circulating Fluidized Beds", Chem. Eng. & Technol., 24(1), 85-90, 2001.
64. Li J, Zhu J-X, Bassi AS and Kofman SH, "Evaluation of Different Dental Materials Using a Slugging Fluidized Bed", Powder Technol., 118(3), 275-284, 2001. 
65. Issangya AS, Grace JR, Bai D and Zhu J-X, "Radial Voidage Variation in CFB Risers", Can. J. Chem. Eng., 79(2), 279-286,  2001.
66. Zhu J-X and Manyele SV, "Radial Flow Characterization in Fluidized Beds and Other Vertical Multiphase Flow Systems", Can. J. Chem. Eng., 79(2), 203-213, 2001. 
67. Huang W-X, Shi Y-F and Zhu J-X, “Pressure Gradients and Flow Behaviors in a 16m High Gas-Solid Riser of CFB”, J. Chem. Eng. Chinese Universities, 15(2), 109-114, 2001.
68. Zhang H, Huang W-X and Zhu J-X, “Gas-Solids Flow Behavior: CFB Riser vs. Downer”, AIChE J., 47(9), 2000-2011, 2001.
69. Huang W-X, Shi Y-F and Zhu J-X, “Solids Holdups of Gas-Solid Two-Phase Upward Flow in Fully Developed Region of CFB Riser ”, J. Chem. Ind. Eng., 52(11), 963-968, 2001.
70. Huang W-X, Shi Y-F and Zhu J-X, “Investigation on Solids Holdups of FCC Particles in a 16m High CFB Riser”, Petrochemical Technol., 30(7), 534-537, 2001.
71. Duan W-F, Zhang J-N, Huang W-X, Shi Y-F and Zhu J-X, “Study on the Derivative Reconstruction Method”, J. Sichuan Univ., 33(5), 102-106, 2001.
72. Parssinen JH and Zhu J-X, “Particle Velocity and Flow Development in a Long and High-Flux Circulating Fluidized Bed Riser”, Chem. Eng. Sci., 56(18), 5295-5303, 2001.
73. Parssinen JH and Zhu J-X, “Solids Concentration and Flow Development in a Long, High-Flux Circulating Fluidized Bed Riser”, AIChE J., 47(10), 2197-2205, 2001.
74. Duan W-F, Zhang J-N, Huang W-X, Shi Y-F and Zhu J-X, “Improvement to the Derivative Reconstruction Method and its Application in Circulating Fluidized Beds”, Chem. Reaction Eng. Technol., 33(5), 102-106, 2001.
75. Lan Q, Bassi AS, Zhu J-X, Margaritis A, “Continuous Protein Recovery Using a Liquid-Solid Circulating Fluidized Bed Ion Exchanger”, AIChE J., 48(2), 252-261, 2002.
76. Hong J and Zhu J-X “Effect of Pipe Orientation on Dense-Phase Transport (II): Inclined Upward and Downward Flows”, Chem. Eng. Commun., 189(4), 489-509, 2002.
77. Qi X-B, Huang W-X, Zhu J-X and Shi Y-F, "Radial Distribution and Axial Development of Particle Velocities in a Long CFB Riser ", J. Chem. Eng. Chinese Univ., 16(2), 168-173, 2002.
78. Lan Q, Bassi AS, Zhu J-X, Margaritis A, “Continuous Protein Recovery from Whey Using Liquid-Solid Circulating Fluidized Bed Ion-exchange Extraction”, Biotech. & Bioeng. J., 78(2), 157-163, 2002.
79. Zheng Y, Zhu J-X, Marwaha NS and Bassi AS, “Radial Solids Flow Structure in a Liquid-Solids Circulating Fluidized Bed”, Chem. Eng. J., 88(2), 141-150, 2002.
80. Zhou W-W, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, “Nonlinear Analysis of Pressure Fluctuations Time Series in Gas-Solid Circulating Fluidized Bed”, Petroleum Technol. & Appl., 20(2), 83-87, 2002.
81. Manyele SV, Pärssinen JH and Zhu J-X, “Characterizing Particle Aggregates in a High-Density and High-Flux CFB Riser”, Chem. Eng. J., 88(2), 151-161, 2002.
82. Ma L-P, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, “Multifractal Measure Analysis of Solids Hold-Up Fluctuation Signal in Circulating Fluidized Bed”, J. Chem. Eng. Chinese Univ., 16(5), 496-502, 2002.
83. Ma L-P, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, “Embedding Window Reconstructing and its Application in Chaotic Analysis of Circulating Fluidized Beds”, Chem. Reaction Eng. Technol., 18(4), 368-372, 2002.
84. Huang W-X, Qi X-B, Pan Y-L, Zhu J-X and Shi Y-F, “Local Solid-Particle Concentration and Flow Development in a Long CFB Riser”, J. Chem. Eng. Chinese Univ., 16(6), 626-631, 2002.
85. Manyele SV, Khayat RE and Zhu J-X, “Investigation of the Dynamics of a High-Flux CFB Riser Using Chaos Analysis of Pressure Fluctuations”, Chem. Eng. Technol., 25(8), 801-810, 2002.
86. Yan A, Parssinen JH. and Zhu J-X, “Flow Properties in the Entrance and Exit Regions of a High-Flux Circulating Fluidized Bed Riser”, Powder Technol., 131(3), 256-263, 2003.
87. Qi X-B, Huang W-X, Pan Y-L, Zhu J-X and Shi Y-F, “Investigation on Solids Concentration and Core-Annulus Flow Structure in Circulating Fluidized Bed Risers”, J. Sichuan Univ., 35(1), 43-47, 2003.
88. Li X-X, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, "Prediction of Solids Holdup Time Series of a Gas-Solid Circulating Fluidized Bed ", Chinese J. Process Eng., 3(1), 8-13, 2003.
89. Lv P, Chang J, Xiong Z, Huang H, Wu C, Chen Y and Zhu J-X, “Biomass Air-Steam Gasification in a Fluidized Bed to Produce Hydrogen-Rich Gas”, Energy & Fuels,  17(3), 677-682, 2003.
90. Zheng Y and Zhu J-X, “Radial Distribution of Liquid Velocity in a Liquid-Solids Circulating Fluidized Bed”, Int. J. Chem. Reaction Eng., 1(1),1-8, 2003.
91. Bolkan Y, Berruti F, Zhu J and Milne B, “Modeling Circulating Fluidized Bed Downers”, Powder Technol., 132(1), 85-100, 2003.
92. Lv P-M, Chang J, Fu Y, Wang T-J, Chen Y and Zhu J, “An Experimental Investigation of Hydrogen Production from Biomass”. Chinese J. Process Eng.,  3(5), 464-470, 2003.
93. Bolkan Y, Berruti F, Zhu J and Milne B, “Hydrodynamic Modeling of CFB Risers and Downers”, Int. J. Chem. Reactor Eng., 1(51), 1-14, 2003.
94. Ma L-P, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, “Analysis of Pressure Fluctuation Signals in a Circulating Fluidized Bed”, J. Chem. Ind. Eng.,  54(5), 619-624, 2003.
95. Manyele SV, Zhu J-X and Zhang H, “Analysis of the Microscopic Flow Structure of a CFB Downer Reactor Using Solids Concentration Signals”, Int. J. Chem. Reaction Eng., 1(55), 1-17, 2003.
96. Li X-X, Shi Y-F, Huang W-X, Qi X-B, Yu H-R and Zhu J-X, “Nonlinear Model for generation of the Solids Holdup Time Series in the CFB Riser Based on Combination of Chaos with Artificial Neural Network”, J. Chem. Eng. Chinese Univ., 17(5), 580-584, 2003.
97. Wang T-J, Chang J and Zhu J, “Synthesis of Dimethel Ether from Biomass”. Chem. Ind. Eng. Progress, 22(11), 1156-1159, 2003.
98. Wang T-J, Chang J, Lv P-M, Zhu J-X, "Single-Step Synthesis of DME from Biomass", Coal Conversion, 26(4), 21-25, 2003.
99. Ma L-P, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, "Embedding Window and its Application in the Analysis of Fluctuation Signal in Circulating Fluidized Bed", J. Kunming Univ. Sci. and Technol., 28(5), 119-123, 2003.
100. Yan AJ, Zhu J-X, Remize P-J and Bordas A, The Effect of Solids Inventory and other Factors on the Axial Solids Holdup Profiles in a Twin-Riser System, Chem. Eng. & Technol., 27(4), 429-434, 2004.
101. Lv P, Chang J, Wang T, Fu Y, Chen Y and Zhu J, Hydrogen-Rich Gas Production from Biomass Catalytic Gasification, Energy and Fuels., 18(1), 228-233, 2004.
102. Li X, Shi Y-F, Huang W-X, Yu H, Zhu J-X, Nonlinear Analysis of Gas-Solid Flow Behaviour in Fast Fluidized Bed Riser, J. Chem. Ind. Eng. , 55(2), 182-188, 2004.
103. Ma L-P, Shi Y-F, Huang W-X, Yu H-R, Zhu J-X, Study on Reducing Noise of Pressure Fluctuation Signal in Circulating Fluidized Bed, Chem. Eng.,32(1), 28-33, 2004.
104. Duan X-P, Qi X-B, Huang W-X, Lin H-B, Zhu J-X. “Investigation on Local Solid Concentration of Coarse Particles in Circulating Fluidized Bed Risers”. J. Sichuan Univ. , 36(2), 46-50, 2004.
105. Wang T-J, Chang J, Zhu J-X, Fu Y, Dimethyl Ether Synthesis From Syngas Derived From Biomass Gasification and Reforming, J. Fuel. Chem.Tech., 32(3), 2004.
106. Lv P, Wang T, Chang J, Wu C-Z, Chen Y and Zhu J, An Experimental Study on Biomass Air-Steam Gasification in a Fluidized Bed, Bioresource Technol., 95(1), 95-101, 2004.
107. Yan A and Zhu J, Scale-Up Effect of Riser Reactors (1) Axial and Radial Solids Concentration Distribution and Flow Development, Ind & Eng Chem Res, 43(19), 5810-5819, 2004.
108. Cui Y; Nakhla G; Zhu J and Patel A, Simultaneous Carbon and Nitrogen Removal in Anoxic-Aerobic Circulating Fluidized Bed Biological Reactor (CFBBR), Environ. Technol.,: 25(6), 699-712, 2004.
109. Xu C and Zhu J, One-step Preparation of Highly Dispersed Metal-supported Catalysts by Fluidized-bed MOCVD for Carbon Nanotube Synthesis,  Nanotechnology, 15, 1671-1681, 2004.
110. Lv P, Chang J, Fu Y, Wang T, Wu C-Z, Chen Y and Zhu J, Studies on the Production of Hydrogen-Rich Gas from Catalytic Biomass Gasification in a Liquid Bed, J Solar Energy., 25(6), 769-775, 2004.
111. Zhu J, Grace J R and Lim C J, "Tube Wear in Gas Fluidized Beds - I. Experimental Findings", Chem. Eng. Sci., 45(4), 1003-1015, 1990.
112. Zhu J, Lim CJ, Grace JR and Lund JA, "Tube Wear in Gas Fluidized Beds - II. Low Velocity Impact Erosion and Semi-Empirical Model for Bubbling and Slugging Fluidized Beds", Chem. Eng. Sci., 46(4), 1151-1156, 1991.
113. Bai D-R, Jin Y, Yu Z-Q and Zhu J-X, "The Axial Distribution of the Cross-Sectionally Averaged Voidage in Fast Fluidized Beds", Powder Technol., 71(1), 51-58, 1992.
114. Yang Y-L, Jin J, Yu Z-Q, Zhu J-X and Bi H-T, "Local Slip Behaviours in the Circulating Fluidized Bed", AIChE Symp. Ser., 89(296), 81-90, 1993.
115. Bi H-T and Zhu J-X, "Static Instability Analysis of Circulating Fluidized Beds and Concept of High Density Risers", AIChE J., 39(8), 1272-1280, 1993.
116. Bi H-T, Grace JR and Zhu J-X, "Type of Choking in Vertical Pneumatic Systems", Int. J. Multiphase Flow, 19(6), 1077-1092, 1993.
117. He Y-L, Lim CJ, Grace JR, Zhu J-X and Qin S-Z, "Measurements of Voidage Profiles in Spouted Beds", Can. J. Chem. Eng., 72(2), 229-234, 1994.
118. Zhou J, Grace JR, Qin S, Brereton C, Lim CJ and Zhu J, "Voidage Profiles in a Circulating Fluidized Bed of Square Cross-Section", Chem. Eng. Sci., 49(19), 3217-3226, 1994.
119. Zahed AH, Zhu J-X and Grace JR, "Modelling and Simulation of Batch and Continuous Fluidized Bed Dryers", Dry. Technol., 13(1-2), 1-28, 1995.
120. Bi HT, Grace JR and Zhu J-X, "Regime Transitions Affecting Gas-Solids Suspensions and Fluidized Beds", Chem. Eng. Des. Dev., 73(A2), 154-161, 1995.
121. Bi HT, Grace JR and Zhu J-X, "Propagation of Pressure Waves and Forced Oscillations in Gas-Solid Fluidized Beds and their Influence on Diagnostics of Local Hydrodynamics", Powder Technol., 82(3), 239-253, 1995.
122. Brereton CMH, Lim CJ, Grace JR, Luckos A and Zhu J, "Pitch and Coke Combustion in a Circulating Fluidized Bed", Fuel, 74(10), 1415-1423, 1995.
123. Zhang JP, Epstein E, Grace JR and Zhu J-X, "Minimum Liquid Fluidization Velocity of Gas-Liquid Fluidized Beds", Chem. Eng. Res. Des., 73(A3), 347-353, 1995.
124. Lockhart C, Zhu J, Brereton CMH, Lim CJ and Grace JR, "Local Heat Transfer, Solids Concentration and Erosion around Membrane Tubes in a Cold Model Circulating Fluidized Bed", Int. J. Heat Mass Tran., 38(13), 2403-2410, 1995.
125. Zhu J-X and Bi H-T, "Distinctions between Low Density and High Density Circulating Fluidized Beds", Can. J. Chem. Eng., 73(5), 644-649, 1995.
126. Zhu J-X, Yu Z-Q, Jin Y, Grace JR and Issangya A, "Cocurrent Downflow Circulating Fluidized Bed (Downer) Reactors - A State of the Art Review", Can. J. Chem. Eng., 73(5), 662-677, 1995.
127. Lim KS, Zhu J-X and Grace JR, "Hydrodynamics of Gas-Solid Fluidization", Int. J. Multiphase Flow, 21(Suppl.), 141-193, 1995.
128. Bai D-R, Zhu J-X, Jin Y and Yu Z-Q, "Internal Recirculation Flow Structure in Vertical Upflow Gas-Solids Suspensions, Part I: A Core-Annular Model", Powder Technol., 85(2), 171-177, 1995.
129. Bai D-R, Zhu J-X, Jin Y and Yu Z-Q, "Internal Recirculation Flow Structure in Vertical Upflow Gas-Solids Suspensions, Part II: Flow Structure Predictions", Powder Technol., 85(2), 179-188, 1995.
130. Liang W-G, Zhu J-X, Jin Y, Yu Z-Q, Wang Z-W and Zhou J, "Radial Nonuniformity of Flow Structure in a Liquid-Solid Circulating Fluidized Bed", Chem. Eng. Sci., 51(10), 2001-2010, 1996.
131. Zhu J-X, Wei F and Yang Y-L, "Cocurrent Gas-Solid Downflow Fluidized Bed (Downer) Reactors: Development and Applications", Chem. Reaction Eng. & Technol., 12(2), 214-224, 1996.
132. Liang W-G, Jin Y, Yu Z-Q, Wang Z-W, Zhu J-X and Chen J, "Flow Characteristics and Mixing Properties in a High Velocity Liquid-Solid Loop Reactor", Chem. Eng. J., 63(3), 181-188, 1996.
133. Zhu J-X and Wei F, "Gas and Solids Flow Structure in Gas-Solid Downflow Reactors", Chem. Reaction Eng. & Technol., 12(3), 323-335, 1996.
134. Bassi AS, Tang D, Lee E, Zhu J-X and Bergougnou MA, "Biosensors in Environmental and Bioprocess Monitoring and Control", Food Technol. Biotech. 34(1), 9-22, 1996.
135. Wei F and Zhu J-X, "Gas and Solids Mixing in Cocurrent Gas-Solid Downflow Fluidized Beds", Chem. Reaction Eng. & Technol., 12(4), 429-437, 1996.
136. Wei F and Zhu J-X, "Effect of Flow Direction on Axial Solids Dispersion in Gas-Solids Upflow and Downflow Systems", Chem. Eng. J., 64(3), 345-352, 1996.
137. Beeckmans JM, Usta B and Zhu J-X, "Effect of Tap Spacing on Observed Differential Pressure Fluctuations in a Pneumatic Transport Line", Can. J. Chem. Eng., 74(6), 834-839, 1996.
138. Liang W-G, Zhang S-L, Zhu J-X, Yu Z-Q, Jin Y and Wang Z-W, "Flow Characteristics of the Liquid-Solid Circulating Fluidized Bed", Powder Technol., 90(2), 95-102, 1997.
139. Yang Y-L and Zhu J-X, "Modelling the Gas and Solids Flow in Gas-Solid Downflow Reactors", Chem. Reaction Eng. & Technol., 13(1), 98-112, 1997.
140. Hong J and Zhu J-X, "Effect of Pipe Orientation on Dense-Phase Transport I: Critical Angle in Inclined Upflow", Powder Technol., 91(2), 115-122, 1997.
141. Zhu J-X and Hong J, "Development and the Current Status of Research on Spouted Beds", Chem. Reaction Eng. & Technol., 13(2), 207-230, 1997.
142. Issangya AS, Bai D, Grace JR, Lim KS and Zhu J-X, "Flow Behavior in the Riser of a High-Density Circulating Fluidized Bed", AIChE Symp. Ser., 93(317), 25-30, 1997.
143. Liang W-G and Zhu J-X, "A Core-Annulus Model for the Radial Flow Structure in a Liquid-Solid Circulating Fluidized Bed (LSCFB)", Chem. Eng. J., 68(1), 51-62, 1997.
144. Bai D, Issangya AS, Zhu J-X and Grace JR, "Analysis of the Overall Pressure Balance around a High-Density Circulating Fluidized Bed", Ind. Eng. Chem. Res., 36(9), 3898-3903, 1997.
145. Zhu J-X, Salah M and Zhou Y-M, "Radial and Axial Voidage Distributions in Circulating Fluidized Bed with Ring-Type Internals", J. Chem. Eng. Jpn., 30(5), 928-937, 1997.
146. Liang, W-G and Zhu J-X, "Effect of Radial Flow Nonuniformity on the Alkylation Reaction in a Liquid-Solid Circulating Fluidized Bed (LSCFB) Reactor", Ind. Eng. Chem. Res., 36(11), 4651-4658, 1997.
147. Bai D-R, Zhu J-X, Jin Y and Yu Z-Q, "Novel Designs and Simulations of FCC Riser Regeneration", Ind. Eng. Chem. Res., 36(11), 4543-4548, 1997.
148. Bai D-R, Zhu J-X, Jin Y and Yu Z-Q, "Simulation of FCC Catalyst Regeneration in a Riser Regenerator", Chem. Eng. J., 71(2), 97-109, 1998.
149. Yang Y-L, Zhu J-X, Yin Y and Yu Z-Q, "Investigation and Modelling of Cocurrent Downflow Circulating Fluidized Bed (Downer)", Chem. Eng. Commun., 170, 133-157, 1998.
150. Jiao S-Y, Zhu J-X, Bergougnou MA, Ikura M and Stanciulescu M, "Investigation and Modelling of the Thermal Cracking of Waste Plastics Derived Oil in a Downer Reactor", Chem. Eng. Res. Dev., 76(B4), 319-331, 1998.
151. Bassi AS, Lee E and Zhu J-X, "Carbon Paste Mediated, Amperometric, Thin Film Biosensors for Fructose Monitoring in Honey", Food Research Int., 31(2), 119-127, 1998.
152. Zhang H, Johnston PJ, Zhu J-X, de Lasa HI and Bergougnou MA, "A Novel Calibration Procedure for a Fiber Optic Concentration Probe", Powder Technol., 100(2-3), 260-272, 1998.
153. Ma Y-L and Zhu J-X, "Experimental Study of Heat Transfer in a Co-Current Downflow Fluidized Bed (Downer)", Chem. Eng. Sci., 54(1), 41-50, 1999.
154. Connell HA, Zhu J and Bassi A, "Effect of Particle Shape on Crossflow Filtration Flux", J. Membrane Sci., 153(1), 121-139, 1999.
155. Zhu J-X, Ma Y-L and Zhang H, "Gas-Solids Mixing in the Distributor Region of a Downer Reactor", Chem. Eng. Res. Dev., 77(A), 151-158, 1999.
156. Johnston PM, de Lasa HI and Zhu J, "Axial Flow Structure in the Entrance Region of a Downer Fluidized Bed - Effects of the Distributor Design", Chem. Eng. Sci., 54(13-14), 2161-2173, 1999.
157. Ma Y-L and Zhu J-X, "Characterizing the Distributor Designs of a Gas-Solids Downflow Reactor with Heat Transfer Study", Chem. Eng. J., 72(3), 235-244, 1999.
158. Bu J-J and Zhu J-X, "Influence of Ring-Type Internals on Axial Pressure Distribution in Circulating Fluidized Bed", Can. J. Chem. Eng., 77(1), 26-34, 1999.
159. Zhang H, Zhu J-X and Bergougnou MA, "Flow Development in a Gas-Solids Downer Fluidized Bed", Can. J. Chem. Eng., 77(2), 194-198, 1999.
160. Zheng Y, Zhu J-X, Wen J-Z, Martin S, Bassi A and Margaritis A, "The Axial Hydrodynamic Behaviour in a Liquid-Solid Circulating Fluidized Bed", Can. J. Chem. Eng., 77(2), 284-290, 1999.
161. Bai D-R, Grace JR and Zhu J-X, "Characterization of Gas Fluidized Beds of Group C, A and B Particles based on Pressure Fluctuations", Can. J. Chem. Eng., 77(2), 319-324, 1999.
162. Johnston PM, Zhu J, de Lasa HI and Zhang H, "Effect of Distributor Designs on the Flow Development in a Downer Reactor", AIChE J., 45(7), 1587-1592, 1999.
163. Liu J, Grace JR, Bi HT, Morikawa H and Zhu J-X, "Gas Dispersion in Fast Fluidization and Dense Suspension Upflow", Chem. Eng. Sci., 54(22), 5441-5449, 1999.
164. Issangya AS, Bai D, Bi H-T, Lim KS, Zhu J-X and Grace JR, "Suspension Densities in a High-Density Circulating Fluidized Bed Riser", Chem. Eng. Sci., 54(22), 5451-5460, 1999.
165. Zhang H, Zhu J-X and Bergougnou MA, "Hydrodynamics in Downflow Fluidized Beds (1): Solids Concentration Profiles and Pressure Gradient Distributions", Chem. Eng. Sci., 54(22), 5461-5470, 1999.
166. Grace JR, Issangya AS, Bai D, Bi H-T and Zhu J-X, "Situating the High-Density Circulating Fluidized Bed", AIChE J., 45(10), 2108-2116, 1999.
167. Rowe GE, Margaritis A, Lan Q, Bassi A and Zhu J-X, "A New Kinetic Model of Protein Adsorption on Suspended Anion-Exchange Resin Particles", Biotechnol. Bioeng., 65(6), 613-621, 1999.

Conference papers

1. Jin Y, Wang Z-W, Zhu J-X, and Yu Z-Q, "A Study of Particle Flow between Fluidized Beds", Fluidization'85 - Science and Technology, eds. M Kwauk and D Kunii, Science Press, Beijing, pp 172-183, 1985.
2. Zhu J, Grace JR and Lim CJ, "Erosion-Causing Particle Impacts on Tubes in Fluidized Beds", Fluidization VI, eds. JR Grace, LW Shemilt and MA Bergougnou, Engineering Foundation, New York, pp 613-620, 1989.
3. Zheng Z-R, Zhu J, Grace JR, Lim CJ and Brereton C, "Particle Motion in Circulating and Revolving Fluidized Beds via Microcomputer-Controlled Colour-Stroboscopic Photography", Fluidization VII, eds. O Potter and D Nicklin, Engineering Foundation, New York, pp 781-789, 1992.
4. Zheng Z-R, Grace JR and Zhu J-X, "Application of High Speed Photography with Rapidly Changing Colour to Cold Model Circulating Fluidized Bed", Proceedings of the 20th International Conference on High Speed Photography and Photonics, SIPE, Victoria, September, 1992.
5. Bi H-T, Zhu J, Jin Y-X and Yu Z-Q, "Forms of Particle Aggregations in CFB", Proc. 6th National Conf. on Fluidization, Wuhan, China, pp 162-167, October, 1993.
6. He Y, Lim CJ, Grace JR, Zhu J-X and Qin S-Z, "Voidage Profiles in Spouted Beds", Proc. 6th National Conf. on Fluidization, Wuhan, China, pp 168-173, October, 1993.
7. Zhu J and Wei F, "Recent Development of Downer Reactor and other Types of Short Contact Reactors", Fluidization VIII, eds. JF Large and C Laguerie, Engineering Foundation, New York, pp 501-510, 1996.
8. Salah M, Zhu J-X, Zhou Y-M and Wei F, "Effect of Internals on the Hydrodynamics of Circulating Fluidized Bed Reactors", Circulating Fluidized Bed Technology V, eds. M Kwauk and J Li, Science Press, Beijing, pp 569-574, 1997.
9. Issangya AS, Bai D, Bi HT, Lim KS, Zhu J and Grace JR, "Axial Solids Holdup Profiles in a High-Density Circulating Fluidized Bed Riser", Circulating Fluidized Bed Technology V, eds. M Kwauk and J Li, Science Press, Beijing, pp 60-65, 1997.
10. Issangya AS, Bai D, Grace JR and Zhu J, "Solids Flux Profiles in a High-Density Circulating Fluidized Bed Riser", Fluidization IX, eds. L-S Fan and TM Knowlton, Engineering Foundation, New York, pp 197-204, 1998.
11. Ma Y-L and Zhu J-X, "Experimental Study of Heat Transfer in a Co-Current Downflow Fluidized Bed (Downer)", Fluidization IX, eds. L-S Fan and TM Knowlton, Engineering Foundation, New York, pp 445-452, 1998.
12. Bai D-R, Grace JR and Zhu J-X, "An Experimental Method for Distinguishing Group C Powders in Geldart’s Classification", Proc. of the 3rd World Congress on Particle Technology, Paper No. 211, Institution of Chemical Engineers, London, 1998 (Brighton, United Kingdom, July 7-9, 1998).
13. Zheng Y, Zhu J-X, Wen J, Martin S, Bassi AS and Margaritis A, "Hydrodynamic Behaviour in a Liquid-Solid Circulating Fluidized Bed", Circulating Fluidized Bed Technology VI, ed. J Werther, Dechema (German Society of Chemical Engineering), Frankfurt, pp 59-64, 1999.
14. Zhu J-X, Zhang H, Johnston PM, Ma Y, de Lasa HI, Bergougnou MA and Ball JS, "Flow Behaviour in the Entrance Region of a Downflow Fluidized Bed", Circulating Fluidized Bed Technology VI, eds. J Werther, Dechema (German Society of Chemical Engineering), Frankfurt, pp 173-178, 1999.
15. Liu J, Grace JR, Bi HT and Zhu J-X, "Gas Mixing in a High Density Circulating Fluidized Bed Riser", Circulating Fluidized Bed Technology VI, eds. J Werther, Dechema (German Society of Chemical Engineering), Frankfurt, pp 399-404, 1999.
16. Pärssinen JH, Zhu J and Yan A-J, “Flow Development in a High-Flux and Long Riser”, Fluidization X, eds. M. Kwauk, J Li and W-C Yang, Engineering Foundation, New York, pp 261-268, 2001.
17. Yan A-J, Pärssinen JH, Cheng Y and Zhu J, “Operation of a Circulating Fluidized Bed”, Circulating Fluidized Bed VII, eds. J. R. Grace, J. Zhu and H. I. de Lasa, Can. Society of Chemical Engineering, Ottawa, pp 295-302, 2002.
18. Yan A-J, Manyele SV, Pärssinen JH and Zhu J, “The Interdependence of Micro and Macro Flow Structure under A High-Flux Flow”, Circulating Fluidized Bed VII, eds. J. R. Grace, J. Zhu and H. I. de Lasa, Can. Society of Chemical Engineering, Ottawa, pp 357-364, 2002.
19. Lv P, Chang J, Xiong Z, Wu C, Chen Y and Zhu J, “Potential of Hydrogen Production from Biomass”,  2003 Int. Conf. on Energy and the Environment, Shanghai Scientific and Technical Publishers, Shanghai, China, pp 215-220, 2003.
20. Li Z, Zhang C and Zhu J, “Numerical Simulations of a Fine Powder Coating System”,  Proc 3rd Int Conf on Computational Heat and Mass Transfer, APM2003, Banff, Canada, May 26-30, Paper #101, 2003.
21. Ma L-P, Shi Y-F, Huang W-X, Yu H-R and Zhu J-X, “Intermittency Analysis of Pressure Fluctuation Signals of Circulating Fluidized Bed”,  Fluidization'2003 Science and Technology, ed. M. Horio, Nagoya, Japan, pp 124-131, 2003.
22. Yan A-J Zhu H and Zhu J, “Comparison of FCC Particle Flow in a Twin-Riser System”, Fluidization XI, eds. U. Arena, R. Chirone, M. Miccio and P. Salatino, Engineering Foundation, New York, pp 387-394, 2004.
23. Xu C Cheng Y and Zhu J, “Fine Particle Fluidization - Effects of Mechanical/Acoustic Vibrations”, Fluidization XI, eds. U. Arena, R. Chirone, M. Miccio and P. Salatino, Engineering Foundation, New York, pp 627-634, 2004.
24. Bolkan Y, Zhu J, Berruti F and Milne B, “Predictive Modeling of Riser and Downer Circulating Fluidized Beds - Application to Fluid Catalytic Cracking”, Fluidization XI, eds. U. Arena, R. Chirone, M. Miccio and P. Salatino, Engineering Foundation, New York, pp 579-586, 2004.
25. Shah U, Zhang C and Zhu J, “Parametric Study of Electrostatic Fine Powder Coating Process by Numerical Modelling and Simulation”, Computational Fluid Mechanics - 12th Annual Conference of the CFD Society of Canada, eds. S. Chen and S. McIlwain, CFD Society of Canada, Ottawa, pp 460-467, 2004.
26. Zhu J, “Circulating Fluidized Beds - Recent Developments and Research Requirements in the Near Future”, Plenary Lecture at Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 41-55, 2005.
27. Qi X-B, Zhu J, Huang W-X, and Shi Y-F, “Experimental Study of Gas-Solid Flow in Risers with FCC and Sand Particles”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 167-173, 2005.
28. Issangya AS, Grace JR and Zhu J, “Bottom and Exit Region Solids Hold-ups in Circulating Fluidized Bed Risers”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 209-215, 2005.
29. Yan A and Zhu J, “Scale-Up Effect of Riser Reactors”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 275-282, 2005.
30. Wu B, Cheng Y, Briens L and Zhu J, “Analysis of the Gas-Solid Suspension Flow Behavior in a High-Density Downer”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 704-711, 2005.
31. Trivedi UJ, Bassi AS and Zhu J, “Liquid-Solid Circulating Fluidized Beds: An Attractive Immobilized Bioreactor System to Treat Phenolic Pollutants”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 762-769, 2005.
32. Chen P, Zhao Z, Wu C, Zhu J and Chen Y, “Research on Biomass Gasification in Circulating Fluidized Bed”, Circulating Fluidized Bed Technology VIII, ed. K. Cen, Int. Academic Publishers, Hangzhou, pp 507-514, 2005.
33. Patel A, Nakhla G and Zhu J, “Anoxic Phosphorous Uptake in Circulating Fluidized Bed Bioreactor”, 9th Environmental Engineering Specialty Conference, in 33rd Annual Can. Society of Civil Eng. Conf., Press, Toronto, Canada, June 2-4, 2005.
34. Li Z-N, Zhang C and Zhu J, “Numerical Study of Air-Particle Two-Phase Flows in a Powder Coating System”, Proc. of 5th Int. Symp. on Multiphase Flow, Heat Mass Transfer and Energy Conversion, , Xi'an, China, Paper No. 340, July 3-6, 2005.
35. Patel A, Nakhla G and Zhu J, “Biological Nutrients Removal in Circulating Fluidized Bed Bioreactor (CFBBR)”, Water Environ. Res. Leading Edge Research, WEFTECH-2005, 78th Annual Technical Exhibition and Conference, Press, Washington, DC,  Oct 29 - Nov 2, 2005.
36. Trivedi U J, Bassi A S and Zhu J-X, “The liquid-solid circulating fluidized beds: Immobilized enzymes bioreactor system to treat phenolic wastes”. 7th World Congress of Chemical Engineering Conference, Scotland. Catalysis & Reaction Engineering, 2005.
37. Zhan H, Zhang C, Zhu J-X, Li X-M, “Numerical Analysis of the Flow in a Liquid-Solid Circulating Fluidized Bed”. 2006 Canadian Society of Mechanical Engineering Annual Conference, Calgary, Canada, May 21-24, 2006.
38. Zhu H-Y and Zhu J-X, “Detailed Investigation into Turbulent Fluidization”. Fluidization XII, eds. Bi H-T, Berruti F, and Pugsley T, Engineering Foundation, Vancouver, pp 87-94, May 13-17, 2007.
39. Qi X-B, Huang W-X, Zhu J-X and Shi Y-F, “Friction between Gas-Solid Suspension and Circulating Fluidized Bed Downers”. Fluidization XII, eds. Bi H-T, Berruti F, and Pugsley T, Engineering Foundation, Vancouver, pp 95-102, May 13-17, 2007.